๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Influence of lubricating oil additives on friction of ceramics under conditions of boundary lubrication

โœ Scribed by P. Studt

Publisher
Elsevier Science
Year
1987
Tongue
English
Weight
377 KB
Volume
115
Category
Article
ISSN
0043-1648

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Friction and wear characteristics of cer
Friction and wear characteristics of ceramic particle filled polytetrafluoroethylene composites under oil-lubricated conditions
โœ Zhao-Zhu Zhang; Qun-Ji Xue; Wei-Min Liu; Wei-Chang Shen ๐Ÿ“‚ Article ๐Ÿ“… 1999 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 309 KB ๐Ÿ‘ 2 views

Five kinds of polytetrafluoroethylene (PTFE)-based composites were prepared: PTFE, PTFE ฯฉ 30 vol % SiC, PTFE ฯฉ 30 vol % Si 3 N 4 , PTFE ฯฉ 30 vol % BN, and PTFE ฯฉ 30 vol % B 2 O 3 . The friction and wear properties of these ceramic particle filled PTFE composites sliding against GCr15 bearing steel u

Effects of lubricating-oil additives on
Effects of lubricating-oil additives on the friction and wear properties of polymers and their composites sliding against steel under oil-lubricated conditions
โœ Zhao-Zhu Zhang; Qun-Ji Xue; Wei-Min Liu; Wei-Chang Shen ๐Ÿ“‚ Article ๐Ÿ“… 2000 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 392 KB ๐Ÿ‘ 2 views

The effects of lubricating-oil additive zinc dialkyldithiophosphate (ZDDP) on the friction and wear properties of polymers and their composites sliding against GCr15 bearing steel were studied by using an MHK-500 ring-on-block wear tester (Timken wear tester). Then the frictional surfaces of the fri

Friction and wear behaviors of several p
Friction and wear behaviors of several polymers under oil-lubricated conditions
โœ Zhao-Zhu Zhang; Qun-Ji Xue; Wei-Min Liu; Wei-Chang Shen ๐Ÿ“‚ Article ๐Ÿ“… 1998 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 417 KB ๐Ÿ‘ 2 views

The friction and wear properties of polytetrafluoroethylene (PTFE), polyimide (PI), and polyamide 66 (PA66) sliding against GCr15 bearing steel under both dry and oil-lubricated conditions were studied by using an MHK-500 ring-block wear tester (Timken wear tester), and then Stribeck's curves of PTF