𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of Kmax and R on Fatigue Crack Growth—A 3D-Model

✍ Scribed by Hans-Joachim Gudladt; Johanna Steinbock

Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
485 KB
Volume
12
Category
Article
ISSN
1438-1656

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effects of tubule orientation on fat
The effects of tubule orientation on fatigue crack growth in dentin
✍ Arola, Dwayne D. ;Rouland, Joseph A. 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 349 KB 👁 1 views

## Abstract The fracture of restored teeth is a significant obstacle to lifelong oral health. Recent studies suggest that fatigue cracks originate at flaws introduced during cavity preparation and that fatigue crack growth is a principle cause of restored tooth fractures. In this study, the rate of

The effect of water immersion on fatigue
The effect of water immersion on fatigue crack growth of two engineering rubbers
✍ R. Seldén 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 225 KB 👁 1 views

Fatigue properties of two engineering rubbers have been measured in air and water. The fatigue crack growth rate, dc/dN, where c is the crack length and N the number of cycles, was measured as a function of tear energy for chloroprene rubber (CR) and natural rubber (NR). In general, the effect of wa

Influence of hysteresis on tensile and f
Influence of hysteresis on tensile and fatigue failure in rubbers
✍ A. R. Payne; R. E. Whittaker 📂 Article 📅 1971 🏛 John Wiley and Sons 🌐 English ⚖ 354 KB

## Abstract The failure criterion developed by Harwood et al. between energy input to break and hysteresis at break for amorphous rubbers has been related to the fatigue and cut growth properties of the rubber which are based on the tearing energy theory. It is found that the constant __K__ in the