𝔖 Bobbio Scriptorium
✦   LIBER   ✦

3D Characterization of the Influence of Porosity on Fatigue Properties of a Cast Al Alloy

✍ Scribed by Olivier Caty; Jean-Yves Buffiere; Eric Maire; Jerome Adrien

Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
491 KB
Volume
13
Category
Article
ISSN
1438-1656

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The influence of manganese addition on m
The influence of manganese addition on mechanical properties of commercial Al-4Mg casting alloys
✍ A. Bayram πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 459 KB

## Abstract The aim of this study was to investigate the mechanical properties of Al‐Mg‐Si alloys aged to peak hardness with different dispersoid volume fraction. It was found that the tensile strength increases with dispersoid content, for alloys having similar ductility. The effect of an increasi

ChemInform Abstract: Alloying Influence
ChemInform Abstract: Alloying Influence on Structure and Magnetic Properties of 3d-4f Intermetallics.
✍ A. S. Ermolenko πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons βš– 24 KB πŸ‘ 2 views

## Abstract ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a β€œFull Text” option. The original article is trackable v

Influence of sintering on the corrosion
Influence of sintering on the corrosion behavior of a Ti-6Al-4V alloy
✍ A. Bautista; C. Moral; G. Blanco; F. Velasco πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 German βš– 358 KB πŸ‘ 1 views

This work studies the influence of the sintering conditions of a Ti-6Al-4V alloy on its corrosion performance. The alloy was vacuum sintered in different conditions of time and temperature. The density and microstructure (designating phase distribution) are evaluated. Corrosion resistance through el