✦ LIBER ✦

Influence of electron heating and cooling on the dynamic behaviour of a semiconductor laser with a saturable absorber

✍ Scribed by A.G. Plyavenek

Publisher: Elsevier Science
Year: 1993
Tongue: English
Weight: 583 KB
Volume: 96
Category: Article
ISSN: 0030-4018
DOI: 10.1016/0030-4018(93)90282-a

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of electron heating on the dyn

Influence of electron heating on the dynamic behaviour of semiconductor injection lasers

✍ A.G. Plyavenek 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 428 KB

Influence of noise on the quasi-homoclin

Influence of noise on the quasi-homoclinic behavior of a laser with saturable absorber

✍ D. Hennequin; F. de Tomasi; L. Frozoni; B. Zambon; E. Arimondo 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 614 KB

Dynamic operations of a dye laser with a

Dynamic operations of a dye laser with a saturable absorber: pumping anisotropy and orientational relaxation

✍ V.A. Gaisenok; G.G. Krylov; S.V. Sergeyev 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 337 KB

Modelling the Influence of Dynamic Strai

Modelling the Influence of Dynamic Strain Ageing on Deformation Behaviour

✍ P. van Liempt; M. Onink; A. Bodin 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 222 KB 👁 2 views

The Influence of Parasitic Capacities on

The Influence of Parasitic Capacities on Measurements of the Dynamic Behaviour of a Gas Discharge

✍ K.-D. Weltmann; H. Deutsch; H. Unger; C. Wilke 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 331 KB

Influence of fan setting height on the c

Influence of fan setting height on the cooling performance of a plate-fin-type heat sink with microprocessor

✍ Keizou Kawamura; Tadakatsu Nakajima; Hitoshi Matsushima 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 147 KB 👁 1 views

## Abstract The cooling performance of a plate‐fin‐type heat sink equipped with a cooling fan was investigated experimentally. The heat sink was 80 mm long, 43 mm wide, and 24 mm in height (including the 4‐mm‐thick base). The cooling fan was 40 × 40 × 15 mm and was set to direct the air flow vertic