✦ LIBER ✦

In situ compatibilization of poly(ethylene-co-ethyl acrylate)/nylon 6 blends

✍ Scribed by E.G. Koulouri; K.G. Gravalos; J.K. Kallitsis

Book ID: 107847441
Publisher: Elsevier Science
Year: 1996
Tongue: English
Weight: 728 KB
Volume: 37
Category: Article
ISSN: 0032-3861
DOI: 10.1016/0032-3861(96)85372-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

In situ compatibilization of poly(ethyle

In situ compatibilization of poly(ethylene terephthalate)/poly(ethylene-co-ethyl acrylate) blends

✍ Kostas G. Gravalos; Joannis K. Kallitsis; Nikos K. Kalfoglou 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 723 KB

Synthesis of nylon 6-g-poly(ethylene gly

Synthesis of nylon 6-g-poly(ethylene glycol) copolymer and its compatibilizing effect in nylon 6/poly(ethylene glycol) blends

✍ Chang Sik Ha; Heui Yeon Choi; Won Jei Cho 📂 Article 📅 1991 🏛 Springer 🌐 English ⚖ 526 KB

Poly(ethylene-graft-ethylene oxide) (PE-

Poly(ethylene-graft-ethylene oxide) (PE-PEO) and poly(ethylene-co-acrylic acid) (PEAA) as compatibilizers in blends of LDPE and polyamide-6

✍ Åsa Halldén; Bertil Ohlsson; Bengt Wesslén 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 366 KB 👁 2 views

In a blend of two immiscible polymers a controlled morphology can be obtained by adding a block or graft copolymer as compatibilizer. In the present work blends of low-density polyethylene (PE) and polyamide-6 (PA-6) were prepared by melt mixing the polymers in a co-rotating, intermeshing twin-screw

Properties of soy protein isolate/poly(e

Properties of soy protein isolate/poly(ethylene-co-ethyl acrylate-co-maleic anhydride) blends

✍ Zhikai Zhong; Susan X. Sun 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 340 KB 👁 2 views

Melt rheology and morphology of uncompat

Melt rheology and morphology of uncompatibilized and in situ compatibilized nylon-6/ethylene propylene rubber blends

✍ Zachariah Oommen; Sisy R. Zachariah; Sabu Thomas; Gabriel Groeninckx; Paula Mold 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 830 KB

Effects of maleated styrene–(ethylene-co

Effects of maleated styrene–(ethylene-co-butene)–styrene on compatibilization and properties of nylon-12,12/nylon-6 blends

✍ Tingxiu Xie; Guisheng Yang 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 522 KB

## Abstract Effects of a maleated triblock copolymer of styrene–(ethylene‐__co__‐butene)–styrene (SEBS‐__g__‐MA) on compatibilization and mechanical properties of nylon‐12,12/nylon‐6 blends were investigated. The results showed that addition of SEBS‐__g__‐MA could improve the compatibility between