𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Melt rheology and morphology of uncompatibilized and in situ compatibilized nylon-6/ethylene propylene rubber blends

✍ Scribed by Zachariah Oommen; Sisy R. Zachariah; Sabu Thomas; Gabriel Groeninckx; Paula Moldenaers; Jan Mewis

Publisher
John Wiley and Sons
Year
2004
Tongue
English
Weight
830 KB
Volume
92
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Melt rheology and morphology of physical
Melt rheology and morphology of physically compatibilized natural rubber–polystyrene blends by the addition of natural rubber-g-polystyrene
✍ R. Asaletha; G. Groeninckx; M. G. Kumaran; Sabu Thomas 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 487 KB 👁 2 views

Blends of natural rubber (NR) and polystyrene (PS) were prepared by melt mixing in a Brabender plasticorder and by solution casting using chloroform as the casting solvent. Earlier studies have indicated that these blends are incompatible and immiscible, and their compatibility can be improved by th

Permeation of chlorinated hydrocarbons t
Permeation of chlorinated hydrocarbons through nylon 6/ethylene–propylene rubber blends
✍ Soney C. George; K. N. Ninan; G. Geuskens; Sabu Thomas 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 277 KB

## Abstract Vapor transport offers one the unique ability to study structure–property relationships in polymers. An analysis of the transport of chlorinated hydrocarbons through nylon/ethylene–propylene rubber (EPR) blend membranes showed us how the permeation behavior varied according to the struc

Molecular transport of aromatic hydrocar
Molecular transport of aromatic hydrocarbons through nylon-6/ethylene propylene rubber blends: Relationship between phase morphology and transport characteristics
✍ Soney C. George; G. Groeninckx; K. N. Ninan; Sabu Thomas 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 458 KB

Molecular transport of aromatic hydrocarbons through nylon/ethylene propylene rubber (EPR) blend has been investigated in the temperature range of 25 to 65 °C. The effect of blend ratio on the transport behavior was studied in detail. Nylon/EPR-50/50 blend shows the lowest uptake among all the syste

Melt rheology and morphology of thermopl
Melt rheology and morphology of thermoplastic elastomers from polyethylene/nitrile-rubber blends: The effect of blend ratio, reactive compatibilization, and dynamic vulcanization
✍ Josephine George; K. Ramamurthy; K. T. Varughese; Sabu Thomas 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 625 KB

A study of the melt-rheological behavior of thermoplastic elastomers from high-density polyethylene and acrylonitrile butadiene rubber (NBR) blends was carried out in a capillary rheometer. The effect of the blend ratio and shear rate on the melt viscosity reveals that the viscosity decreases with t