𝔖 Bobbio Scriptorium
✦   LIBER   ✦

In-process drilled hole inspection for aerospace applications

✍ Scribed by J.L. Garbini; R.A. Saunders; J.E. Jorgensen


Publisher
Elsevier Science
Year
1991
Tongue
English
Weight
971 KB
Volume
13
Category
Article
ISSN
0141-6359

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


A Model for Laser Hole Drilling in Metal
✍ Ram K. Ganesh; Wallace W. Bowley; Robert R. Bellantone; Yukap Hahn πŸ“‚ Article πŸ“… 1996 πŸ› Elsevier Science 🌐 English βš– 623 KB

but not least, the presence of the laser beam itself. Typical temperature gradients encountered are of the order of 10 6 Њ A direct computer simulation technique is developed to analyze quantitatively the influence of the fluid flow and heat transfer in the K/cm. Power density of 0.1 to 20 MW/cm 2 i

Processing of Carbon Nanofiber Reinforce
✍ Jorge Barcena; Javier Coleto; Shi C. Zhang; Gregory E. Hilmas; William G. Fahren πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 492 KB πŸ‘ 2 views

## Abstract Ceramic matrix composites (CMCs) based on zirconium diboride (ZrB~2~) reinforced by vapor grown carbon nanofibers are a potential constituent of reusable thermal protection systems. A manufacturing procedure was devised that involved the fabrication of thin films by tape casting to obta

Surface Coatings Based on Polysilsesquio
✍ Daniel Kessler; Maria C. Lechmann; Seunguk Noh; RΓΌdiger Berger; Changhee Lee; Jo πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 366 KB

## Abstract Optoelectronic devices usually consist of a transparent conductive oxide (TCO) as one electrode. Interfacial engineering between the TCO electrode and the overlying organic layers is an important method for tuning device performance. We introduce poly(methylsilsesquioxane)–poly(__N__,__