✦ LIBER ✦

Improvements of the Si3N4 brazed joints with intermetallics

✍ Scribed by Liu Gen-mao; Zou Gui-sheng; Wu Ai-ping; Zhang De-ku

Publisher: Elsevier Science
Year: 2006
Tongue: English
Weight: 538 KB
Volume: 415
Category: Article
ISSN: 0921-5093
DOI: 10.1016/j.msea.2005.09.096

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Interfacial microstructure of Si3N4/Si3N

Interfacial microstructure of Si3N4/Si3N4 brazing joint with Cu–Zn–Ti filler alloy

✍ J. Zhang; X.M. Zhang; Y. Zhou; M. Naka; Atroshenko Svetlana 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 709 KB

Effect of Ti content on microstructure a

Effect of Ti content on microstructure and strength of Si3N4/Si3N4 joints brazed with Cu–Pd–Ti filler metals

✍ C.F. Liu; J. Zhang; Y. Zhou; Q.C. Meng; M. Naka 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 655 KB

A novel Cu-Pd-Ti filler alloy was adopted to braze silicon nitride ceramic to itself in the form of Cu/(Ti, Pd)/Cu. The reliable Si 3 N 4 joints were obtained. The effect of Ti content on the microstructure and properties of the Si 3 N 4 joints was investigated using EPMA, SEM and three-point bendin

Interfacial microstructure of induction

Interfacial microstructure of induction brazed joints of TiAl-based intermetallics to steel 35CrMo with AgCuNiLi filler

✍ P. He; J.C. Feng; W. Xu 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 433 KB

Mechanical property and fracture charact

Mechanical property and fracture characteristic of induction brazed joints of TiAl-based intermetallics to steel 35CrMo with Ag–Cu–Ni–Li filler

✍ P. He; J.C. Feng; W. Xu 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 830 KB

Development of CNT/Si3N4 composites with

Development of CNT/Si3N4 composites with improved mechanical and electrical properties

✍ Csaba Balázsi; Balázs Fényi; Norbert Hegman; Zsuzsanna Kövér; Ferenc Wéber; Zofi 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 443 KB

Contribution to Characterize the Propert

Contribution to Characterize the Properties of high-temperature brazed joints

✍ Prof. Dr.-Ing. H.-D. Steffens; H.-A. Crostack; B. Wielage 📂 Article 📅 1980 🏛 John Wiley and Sons 🌐 English ⚖ 860 KB

## Abstract Investigations performed to study the strength behaviour supply informations about the failure pattern under loading. Beside metallographic and fractographic investigations acoustic emission measurements are used for interpretation. The results obtained for brazed joints – Ni Cr 20 Ti A