✦ LIBER ✦

Improvement of the ON resistance of power VDMOS devices by surface doping: effect on the breakdown voltage

✍ Scribed by G. Charitat; H. Tranduc; P. Granadel; P. Rossel

Publisher: Elsevier Science
Year: 1990
Tongue: English
Weight: 317 KB
Volume: 21
Category: Article
ISSN: 0026-2692
DOI: 10.1016/0026-2692(90)90032-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of oxygen pressure on the voltage

Effect of oxygen pressure on the voltage-controlled negative resistance of Al-AlN-Au devices

✍ Koji Tanaka; Yoichiro Uemura; Minoru Iwata 📂 Article 📅 1978 🏛 Elsevier Science 🌐 English ⚖ 120 KB

The effect of the compaction pressure on

The effect of the compaction pressure on the microwave surface resistance of the Pb doped BSCCO system

✍ R. Torres; C. de Francisco; J.M. Muñoz; M. Zazo; L. Torres; J. Iñiguez 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 169 KB

On the blocking behaviour of mesa high v

On the blocking behaviour of mesa high voltage power devices passivated by semi-insulating polycrystalline silicon films

✍ Edmund P. Burte 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 644 KB

Effects of O2 pressure on the voltage-co

Effects of O2 pressure on the voltage-controlled negative resistance and on the electron emission of carbon thin film devices with silver electrodes

✍ Hisashi Araki; Teruo Hanawa 📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 621 KB

The effect of applied negative bias volt

The effect of applied negative bias voltage on the structure of Ti-doped a-C:H films deposited by FCVA

✍ Peng Wang; Xia Wang; Youming Chen; Guangan Zhang; Weimin Liu; Junyan Zhang 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 689 KB

A case study for the effect of a flow im

A case study for the effect of a flow improvement device (a partial wake equalizing duct) on ship powering characteristics

✍ Emin Korkut 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 338 KB

A case study for the energy saving in the powering characteristics of a river going general cargo ship has been carried out. Two different hull forms were generated from the original hull form of the vessel to optimise the stern flow of the vessel. A possible energy saving concept, such as partial w