𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Improvement of microstrip low pass filters' characteristics using an optimized number of new multi-ring defected ground structures

✍ Scribed by A. Boutejdar; A. Elsherbini; Liu Haiwen; A. Omar


Publisher
John Wiley and Sons
Year
2007
Tongue
English
Weight
651 KB
Volume
49
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

A novel two square split ring resonators defected ground structure (DGS) is investigated for use in low pass filters (LPF) design. An equivalent circuit and parametric study for the DGS are presented. The DGS is employed in a LPF to obtain very wide reject band. The measured results illustrated the excellent performance. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 3074–3078, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22964


📜 SIMILAR VOLUMES


Design of novel microstrip low-pass filt
✍ Petr Vágner; Miroslav Kasal 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 471 KB

## Abstract A novel microstrip low‐pass filter utilizing defected ground structure (DGS) units is presented in this article. A DGS unit is simulated with different physical dimensions in order to show variation of attenuation pole and cut‐off frequency. Next, a low‐pass filter using proposed DGS un

Design of a compact microstrip low-pass
✍ Feng Wei; Xiao Wei Shi; Bin Li; Qiu Lin Huang; Xin Huai Wang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 499 KB

## Abstract A novel compact microstrip low‐pass filter (LPF) is proposed in this article. The proposed LPF is composed of semicircle‐defected ground structures (S‐DGS) and semicircle stepped‐impedance shunt stubs (S‐SISS). An equivalent lumped L‐C circuit model is also presented. With the S‐DGS and

Improved performance of stepped impedanc
✍ Min-Hung Weng; Chi-Hsiang Pan; Chih-Wei Shao; Hung-Wei Wu 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 118 KB

## Abstract A stepped impedance resonator (SIR) low‐pass filter using defect ground structure (DGS), which has high isolation and compact size, is proposed. The proposed defect ground structure (DGS) provides excellent cutoff and stopband characteristics for improving the stopband rejection and the

Improvement of compactness of low pass a
✍ Ahmed Boutejdar; Abbas Omar 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 533 KB

## Abstract This article presents a method to reduce the size of LPF/BPF using defected ground structure (DGS). The DGS filter structure employs two cross‐slots etched in the ground plane. To validate the feasibility of the proposed design method, a low‐pass filter with 0.1‐dB ripple is designed, f