𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Improvement of compactness of low pass and band pass filter using a simple combination of cross-defected ground structure and a discontinuous microstrip line

✍ Scribed by Ahmed Boutejdar; Abbas Omar

Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
533 KB
Volume
51
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

This article presents a method to reduce the size of LPF/BPF using defected ground structure (DGS). The DGS filter structure employs two cross‐slots etched in the ground plane. To validate the feasibility of the proposed design method, a low‐pass filter with 0.1‐dB ripple is designed, fabricated, and measured. Then a simple technique to transform the designed BPF to a LPF was presented. Additionally, a new suspended Layer's technique will be used with DGS in order to reduce more the size and to suppress the second harmonic in reject band. The second order band pass filter was designed using the proposed technique and their simulation results confirmed the validity of the technique. Simulated and measured results of the proposed filters are presented and show good agreements. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 1191–1195, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24291

📜 SIMILAR VOLUMES

Design of a compact microstrip low-pass
Design of a compact microstrip low-pass filter using defected ground structure
✍ Feng Wei; Xiao Wei Shi; Bin Li; Qiu Lin Huang; Xin Huai Wang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 499 KB

## Abstract A novel compact microstrip low‐pass filter (LPF) is proposed in this article. The proposed LPF is composed of semicircle‐defected ground structures (S‐DGS) and semicircle stepped‐impedance shunt stubs (S‐SISS). An equivalent lumped L‐C circuit model is also presented. With the S‐DGS and

Design of novel microstrip low-pass filt
Design of novel microstrip low-pass filter using defected ground structure
✍ Petr Vágner; Miroslav Kasal 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 471 KB

## Abstract A novel microstrip low‐pass filter utilizing defected ground structure (DGS) units is presented in this article. A DGS unit is simulated with different physical dimensions in order to show variation of attenuation pole and cut‐off frequency. Next, a low‐pass filter using proposed DGS un

Improvement of microstrip low pass filte
Improvement of microstrip low pass filters' characteristics using an optimized number of new multi-ring defected ground structures
✍ A. Boutejdar; A. Elsherbini; Liu Haiwen; A. Omar 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 651 KB

## Abstract A novel two square split ring resonators defected ground structure (DGS) is investigated for use in low pass filters (LPF) design. An equivalent circuit and parametric study for the DGS are presented. The DGS is employed in a LPF to obtain very wide reject band. The measured results ill

Design of compact stop-band extended mic
Design of compact stop-band extended microstrip low-pass filters by employing mutual-coupled square-shaped defected ground structures
✍ A. Boutejdar; M. Makkey; A. Elsherbini; A. Omar 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 925 KB

## Abstract A new technique to reduce the size, improve the rejection in the stop‐band of a low‐pass filter using modified defected ground structure (DGS) is proposed. An equivalent circuit model is used to study the DGS characteristics. The parameters are extracted by using a simple circuit analys

Design of compact microstrip filter with
Design of compact microstrip filter with large reject band using a new multisectioned T-shaped defected ground structure and multilayer technique
✍ M. Al Sharkawy; A. Boutejdar; D. Abd El Aziz; E. Galal 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 977 KB

## Abstract In this article, a new compact defected ground structure (DGS) low pass filter (LPF) with wide rejection band, low insertion loss in the stopband, and sharp transition from passband to stopband is proposed__.__ The prototype LPF is composed of three repetitive DGS elements with open stu