✦ LIBER ✦

Improvement of mechanical properties of nickel-rich NiAl at room temperature

✍ Scribed by Cheng, Tianyi

Book ID: 123195896
Publisher: Elsevier Science
Year: 1992
Weight: 428 KB
Volume: 27
Category: Article
ISSN: 0956-716X
DOI: 10.1016/0956-716X(92)90504-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Nanometer substructures and its effects

Nanometer substructures and its effects on ductility and toughness at room temperature in nickel-rich NiAl

✍ Cheng, Tianyi 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 976 KB

Improvement of ductility of NiAl at room

Improvement of ductility of NiAl at room temperature and manufacturing of NiAlTiB2 composites by melt spinning

✍ Tianyi Cheng; B. Cantor 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 493 KB

A Ni-21wt.%Al alloy and a Ni-21wt.%Al-l.lwt.%TiB 2 composite were prepared by melt spinning at different cooling rates. The resulting microstructures have been examined and the mechanical properties have also been measured. The bend ductility and microhardness of the alloy both increase with decreas

High temperature x-ray diffraction inves

High temperature x-ray diffraction investigation of nickel-rich NiAl and NiAlTiB2

✍ Cheng, Tianyi; Flower, H.M. 📂 Article 📅 1994 🏛 Elsevier Science ⚖ 641 KB

Effect of low-temprature strain on mecha

Effect of low-temprature strain on mechanical properties of chromium-nickel steels at room temperature

✍ A. A. Lebedev; V. N. Rudenko; B. I. Koval'chuk 📂 Article 📅 1983 🏛 Springer 🌐 English ⚖ 256 KB

Strain-controlled fatigue of NiAl crysta

Strain-controlled fatigue of NiAl crystals at room temperature

✍ Smith, T.R.; Kallingal, C.G.; Rajan, K.; Stoloff, N.S. 📂 Article 📅 1992 🏛 Elsevier Science ⚖ 321 KB

Mechanical properties of Gd123 bulk supe

Mechanical properties of Gd123 bulk superconductors at room temperature

✍ A. Murakami; K. Katagiri; K. Kasaba; Y. Shoji; K. Noto; H. Teshima; M. Sawamura; 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 815 KB

In order to investigate the mechanical properties of Gd123 single-grain bulk superconductors fabricated using a modified quench and melt growth method, tensile tests in the direction parallel and perpendicular to the c-axis have been carried out at 293 K by using the small specimens cut from bulk su