𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Improvement of adhesion of PET fibers to rubber by argon-oxygen plasma treatment

✍ Scribed by Stephane Carlotti; Andre Mas

Publisher
John Wiley and Sons
Year
1998
Tongue
English
Weight
297 KB
Volume
69
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis

Polyethylene terephthalate fibers cords were modified with argon, oxygen, and successive argon/oxygen cold plasmas as a function of treatment time. Plasma treated cords were coated with resorcinol formaldehyde latex, then tested as rubber reinforcing materials. The peel strength was discussed with respect to the polar component of the surface energy and the etching of the fibers. An increased adhesion of Γ‡ 280% was obtained with 30 min argon plasma followed by 30 min oxygen plasma, at 75 W power and 40 Pa pressure without altering the traction strength of the fibers cords.

πŸ“œ SIMILAR VOLUMES

Some plasma treatment of PET fibres and
Some plasma treatment of PET fibres and adhesion testing to rubber
✍ Manenq, F. ;Carlotti, S. ;Mas, A. πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 116 KB

Polyethylene terephthalate fibre cords were modified with oxygen, water or hydrogen peroxide cold plasmas or coated with acrylic acid, butadiene and hydrogen sulfide cold plasmas. Treated surfaces were studied in terms of their surface energies by contact angle measurement and morphology by scanning

Improvement of adhesion and long-term ad
Improvement of adhesion and long-term adhesive reliability of liquid crystalline polyester film by plasma treatment
✍ Yasuhiro Kurihara; Hiroyuki Ohata; Masahiko Kawaguchi; Shinichi Yamazaki; Kunio πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 264 KB

## Abstract Surface modification of thermotropic liquid crystalline aromatic polyester (LCP) films was examined by low‐pressure plasma treatment to improve initial adhesion and long‐term adhesive reliability between the LCP film and an epoxy bonding sheet for printed circuit boards. Plasma irradiat

Improved adhesion of silicone rubber to
Improved adhesion of silicone rubber to polyurethane by induced surface reconstruction
✍ Ming-Fu Tsai; Yu-Der Lee; Yong-Chien Ling πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 154 KB πŸ‘ 1 views

Induced surface reconstruction of silicone rubber by blending polydimethylsiloxane (PDMS) reactants with bifunctional PDMS-hydroxyl terminated polybutadiene (PDMS-b-HTPB) copolymers and curing with appropriate mold material was attempted to improve the adhesion of chemically inert silicone rubber to