## Abstract In this article, a novel distributed circuit model of coplanar waveguide to microstrip (CPW‐M) transition is presented by using generalized telegrapher equation. In comparison with conventional nonuniform transmission line equation, the generalized telegrapher equation has two additiona
Improved circuit model for coplanar-waveguide to microstrip-line transition on silicon substrate
✍ Scribed by Qi Hua; Wen-Yan Yin; Liang Zhou; Jun-Fa Mao; Kai Kang; Lei Zhu
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 294 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
An improved equivalent circuit model is proposed to accurately characterize a metal via transition, between a finite ground coplanar waveguide (FGCPW) and a finite ground thin film microstrip line (FGTFML), which was fabricated using standard CMOS technology. This circuit model with only a few lumped‐circuit elements is established and optimized to achieve a wide frequency range of operation, i.e., 1.0–30.0 GHz. A via transition circuit is fabricated and the measured results have evidently validated the predicted results derived from our proposed circuit model. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 141–144, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23011
📜 SIMILAR VOLUMES
## Abstract In this article, a transition of coplanar line to substrate‐integrated waveguide onto electro‐optical LiNbO~3~ substrate for the design of traveling‐wave optical phase modulator at 60 GHz were proposed, designed, and fabricated for the first time. Micromachining of the LiNbO~3~ substrat
A wideband coplanar to inverted microstrip transition is developed for a low-loss and low-cost inverted line on silicon. The measurements and simulation results are presented. The measured performance of the back-to-back transitions exhibits an insertion loss of less than 0.4 dB and a return loss be
## Abstract In this paper, effective dielectric constant, line attenuation, and characteristic impedance of thin film microstrip line (TFML) on polyimide dielectric as interconnection for radio frequency integrated circuits is investigated. The TFML is fabricated on low cost low resistivity silicon