✦ LIBER ✦

Impact of injection-molding processing parameters on the electrical, mechanical, and thermal properties of thermoplastic/carbon nanotube nanocomposites

✍ Scribed by P. F. Rios; A. Ophir; S. Kenig; R. Efrati; L. Zonder; R. Popovitz-Biro

Publisher: John Wiley and Sons
Year: 2010
Tongue: English
Weight: 574 KB
Volume: 120
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.32983

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effect of carbon nanotube hydrophobi

The effect of carbon nanotube hydrophobicity on the mechanical properties of carbon nanotube-reinforced thermoplastic polyurethane nanocomposites

✍ Simon Smart; David Fania; Adriyan Milev; G. S. Kamali Kannangara; Max Lu; Darren 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 567 KB

Effect of Processing Parameters on the M

Effect of Processing Parameters on the Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foams

✍ Steven Wong; John W. S. Lee; Hani E. Naguib; Chul B. Park 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 356 KB 👁 1 views

## Abstract In this study, the effects of processing parameters on the mechanical properties of injection molded thermoplastic polyolefin (TPO) foams are investigated. Closed cell TPO foams were prepared by injection molding process. The microstructure of these foamed samples was controlled by care

Effect of the viscosity and processing p

Effect of the viscosity and processing parameters on the surface resistivity of polypropylene/multiwalled carbon nanotube and ethylene–propylene–diene/multiwalled carbon nanotube nanocomposites

✍ Kyoung-Tae Min; Gue-Hyun Kim 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 374 KB 👁 2 views

The effect of organoclay on the mechanic

The effect of organoclay on the mechanical properties and morphology of injection-molded polyamide 6/polypropylene nanocomposites

✍ W. S. Chow; Z. A. Mohd. Ishak; U. S. Ishiaku; J. Karger-Kocsis; A. A. Apostolov 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 673 KB

Effect of the processing parameters on t

Effect of the processing parameters on the surface resistivity of acrylonitrile–butadiene rubber/multiwalled carbon nanotube nanocomposites

✍ Byung-Mook Cho; Gue-Hyun Kim 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 378 KB 👁 2 views

Effect of processing parameters on the c

Effect of processing parameters on the cellular morphology and mechanical properties of thermoplastic polyolefin (TPO) microcellular foams

✍ Steven Wong; Hani E. Naguib; Chul B. Park 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 630 KB