✦ LIBER ✦

Effect of processing parameters on the cellular morphology and mechanical properties of thermoplastic polyolefin (TPO) microcellular foams

✍ Scribed by Steven Wong; Hani E. Naguib; Chul B. Park

Publisher: John Wiley and Sons
Year: 2007
Tongue: English
Weight: 630 KB
Volume: 26
Category: Article
ISSN: 0730-6679
DOI: 10.1002/adv.20104

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of Processing Parameters on the M

Effect of Processing Parameters on the Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foams

✍ Steven Wong; John W. S. Lee; Hani E. Naguib; Chul B. Park 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 356 KB 👁 1 views

## Abstract In this study, the effects of processing parameters on the mechanical properties of injection molded thermoplastic polyolefin (TPO) foams are investigated. Closed cell TPO foams were prepared by injection molding process. The microstructure of these foamed samples was controlled by care

Effect of process parameters and composi

Effect of process parameters and composition on mechanical, thermal, and morphological properties of polypropylene/sawdust composites

✍ Sílvia Helena Prado Bettini; Arnaldo Toledo Uliana; Dennis Holzschuh 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 540 KB

Impact of injection-molding processing p

Impact of injection-molding processing parameters on the electrical, mechanical, and thermal properties of thermoplastic/carbon nanotube nanocomposites

✍ P. F. Rios; A. Ophir; S. Kenig; R. Efrati; L. Zonder; R. Popovitz-Biro 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 574 KB

Effects of the chemical foaming agents,

Effects of the chemical foaming agents, injection parameters, and melt-flow index on the microstructure and mechanical properties of microcellular injection-molded wood-fiber/polypropylene composites

✍ Andrzej K. Bledzki; Omar Faruk 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 440 KB 👁 2 views

Effect of quasi-carbonization processing

Effect of quasi-carbonization processing parameters on the mechanical properties of quasi-carbon/phenolic composites

✍ Donghwan Cho; Jongmoon Lee 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 282 KB 👁 2 views

Thermoplastic elastomers based on epoxid

Thermoplastic elastomers based on epoxidized natural rubber and high-density polyethylene blends: Effect of blend compatibilizers on the mechanical and morphological properties

✍ Charoen Nakason; Methakarn Jarnthong; Azizon Kaesaman; Suda Kiatkamjornwong 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 473 KB 👁 2 views