𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Hyrdoxyapatite Coatings on Titanium

✍ Scribed by U. Sampathkumaran; M. R. De Guire; R. Wang


Publisher
John Wiley and Sons
Year
2001
Tongue
English
Weight
421 KB
Volume
3
Category
Article
ISSN
1438-1656

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Antibacterial coatings on titanium impla
✍ Lingzhou Zhao; Paul K. Chu; Yumei Zhang; Zhifen Wu πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 120 KB

## Abstract Titanium and titanium alloys are key biomedical materials because of their good biocompatibility and mechanical properties. Nevertheless, infection on and around titanium implants still remains a problem which is usually difficult to treat and may lead to eventual implant removal. As a

Silicon nitride coating on titanium to e
✍ Wang, Russell R. ;Welsch, Gerhard E. ;Monteiro, Othon πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 564 KB

Failures that occur in titanium-ceramic restorations are of concern to clinicians. The formation of poorly adhering oxide on titanium at dental porcelain sintering temperatures causes adherence problems between titanium and porcelain, which is the main limiting factor in the fabrication of titanium-

Interfaces in graded coatings on titaniu
✍ S. Lopez-Esteban; C. F. Gutierrez-Gonzalez; L. Gremillard; E. Saiz; A. P. Tomsia πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 629 KB

## Abstract Graded bilayered glass–ceramic composite coatings on Ti6Al4V substrates were fabricated using an enameling technique. The layers consisted of a mixture of glasses in the CaO‐MgO‐Na~2~O‐K~2~O‐P~2~O~5~ system with different amounts of calcium phosphates (CPs). Optimum firing conditions ha

Alumina-Forming Coatings for Titanium an
✍ L. Niewolak; V. Shemet; A. Gil; L. Singheiser; J. W. Quadakkers πŸ“‚ Article πŸ“… 2001 πŸ› John Wiley and Sons 🌐 English βš– 310 KB

Scanning electron microscopy (SEM-JEOL JSM 5300) was performed on the fracture surfaces of the mechanically failed specimens to study the interfaces between optical fibers and host materials. The fracture surfaces were vaporcoated with a thin layer of gold to enhance the image.