✦ LIBER ✦

Hydrostatic extrusion of wires

✍ Scribed by N.H. Loh; J.S.T. Cheung

Publisher: Elsevier Science
Year: 1989
Weight: 499 KB
Volume: 19
Category: Article
ISSN: 0378-3804
DOI: 10.1016/0378-3804(89)90065-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Multicore MgB2 wires made by hydrostatic

Multicore MgB2 wires made by hydrostatic extrusion

✍ P. Kováč; W. Pachla; I. Hušek; M. Kulczyk; T. Melišek; T. Holúbek; R. Diduszko; 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 644 KB

Seven-filament MgB 2 /Fe and MgB 2 /Nb/Cu wires have been made by in situ process using hydrostatic extrusion, drawing and two-axial drawing deformation into the wire size of 1.1 Â 1.1 mm 2 . The conductors were sintered at 650 °C/0.5 h and studied in terms of field-dependent transport critical curr

Cold and warm hydrostatic extrusion of f

Cold and warm hydrostatic extrusion of fine wire

✍ Kozo Osakada; Ryuzo Asada 📂 Article 📅 1978 🏛 Elsevier Science ⚖ 639 KB

The extrusion of bismuth wire

✍ G.F.S 📂 Article 📅 1927 🏛 Elsevier Science 🌐 English ⚖ 85 KB

Hydrostatic extrusion of polyethylene fi

Hydrostatic extrusion of polyethylene filled with hydroxyapatite

✍ N. Hugo Ladizesky; Ian M. Ward; William Bonfield 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 109 KB

The hydrostatic extrusion of polyethylene filled with hydroxyapatite has been studied. It is shown that the extrusion behavior is qualitatively similar to that of unfilled polymer. Extruded products with flexural moduli of at least 10 GPa and flexural strengths of 90 MPa have been produced, which ca

Hydrostatic extrusion of round and shape

Hydrostatic extrusion of round and shaped tubes

✍ Tomiharu matsushita; Yoshihiro Yamaguchi; Masataka Noguchi; Masao Nishihara 📂 Article 📅 1978 🏛 Elsevier Science ⚖ 908 KB

Critical comments on continuous hydrosta

Critical comments on continuous hydrostatic extrusion

✍ J.M. Alexander 📂 Article 📅 1972 🏛 Elsevier Science ⚖ 403 KB