𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Hydrostatic extrusion of amorphous Fe82B12Si6 and U70Cr30

✍ Scribed by John F. Lakner

Publisher
Elsevier Science
Year
1986
Weight
153 KB
Volume
139-140
Category
Article
ISSN
0378-4363

No coin nor oath required. For personal study only.

✦ Synopsis

An investigation of the feasibility of forming dense cylinders from amorphous Fes2B~2Si~, and UToCr~, , platelets using a combination of die compaction and hydrostatic extrusion is described. Densities of up to 84% and 87% of the theoretical value where realized in one pass using an extrusion ratio of 1.6 for the iron and uranium alloys, respectively. Equations are presented for consolidation and extrusion parameters.

πŸ“œ SIMILAR VOLUMES

Hydrostatic extrusion of polyethylene fi
Hydrostatic extrusion of polyethylene filled with hydroxyapatite
✍ N. Hugo Ladizesky; Ian M. Ward; William Bonfield πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 109 KB

The hydrostatic extrusion of polyethylene filled with hydroxyapatite has been studied. It is shown that the extrusion behavior is qualitatively similar to that of unfilled polymer. Extruded products with flexural moduli of at least 10 GPa and flexural strengths of 90 MPa have been produced, which ca