✦ LIBER ✦

Hydrogen transport and degradation of the duplex Fe-Mn-Al alloy

✍ Scribed by W. Y. Wei; C. H. Tzeng; J. K. Wu

Publisher: Springer
Year: 1990
Tongue: English
Weight: 533 KB
Volume: 9
Category: Article
ISSN: 0261-8028
DOI: 10.1007/bf00726545

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Magnetization of dilute Al-Mn and Al-Fe

Magnetization of dilute Al-Mn and Al-Fe alloys

✍ L. Moberly; T. Steelhammer; O. G. Symko; W. Weyhmann 📂 Article 📅 1978 🏛 Springer US 🌐 English ⚖ 303 KB

The magnetization of very dilute Al-Mn and AI-Fe alloys was measured from 2 to 0.01 K in order to obtain a limit on how nonmagnetic such systems are. Results indicate that the impurity contribution to the magnetization is almost temperature independent and that the moment per impurity is less than 1

Fretting wear of mechanically alloyed Al

Fretting wear of mechanically alloyed AlFe and AlFeMn alloys

✍ X.P. Niu; L. Froyen; L. Delaey; C. Peytour 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 795 KB

Surface characterization of rapidly soli

Surface characterization of rapidly solidified Al-Mn and Al-Fe alloys

✍ A. Csanàdy; I. Bertòti; M. Mohai; S. Percel; B. Albert 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 207 KB

The cavitation erosion of FeMnAl alloy

The cavitation erosion of FeMnAl alloys

✍ S.C. Chang; W.H. Weng; H.C. Chen; S.J. Lin; P.C.K. Chung 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 626 KB

Degradable metallic biomaterials: Design

Degradable metallic biomaterials: Design and development of Fe–Mn alloys for stents

✍ Hendra Hermawan; Dominique Dubé; Diego Mantovani 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 460 KB

## Abstract Designing materials having suitable mechanical properties and targeted degradation behavior is the key for the development of biodegradable materials for medical applications, including stents. A series of Fe–Mn alloys was developed with the objective to obtain mechanical properties sim

Stress corrosion cracking of the austeni

Stress corrosion cracking of the austenitic Fe-Al-Mn alloy in chloride environment

✍ S. C. Tjong 📂 Article 📅 1986 🏛 John Wiley and Sons 🌐 German ⚖ 1011 KB

The SCC behavior of Fe-8.7A1-29.7Mn-1.04C alloy in a 20% sodium-chloride solution (100 "C) has been investigated by the slow strain rate method. The results showed that the alloy was susceptible to SCC only at the free corrosion potential and at the applied strain rate of 2.8 x lO-'/s. Application o