Hydration and hydraulic properties of the Q phase in the system CaOAl2O3MgOH2O referred to high alumina cements
✍ Scribed by I. Kaprálik; L. Stevula; F. Hanic
- Publisher
- Elsevier Science
- Year
- 1989
- Tongue
- English
- Weight
- 429 KB
- Volume
- 19
- Category
- Article
- ISSN
- 0008-8846
No coin nor oath required. For personal study only.
✦ Synopsis
Hydration and hydraulic properties of the quaternary phase Q = C20A13M~S 3 were investigated. The phase is located in the subsystem C2S-CA-C~AT-M~) ih th~ z-one of the variable mineral composition of high alumina cern~nts (HACk. Relations between the composition of the Q phase and the phase composition of its hydration products were determined. Influence of the hydration processes and the formation of hydrates on the physico-mechanical properties of the system during setting and hardening at room temperature or at hydrothermal conditions (190"C, saturated vapour pressure) was established. It was proved that the hydraulic properties of the Q phase are close to those of the high alumina cements.
📜 SIMILAR VOLUMES
The individual subsystems of the basic five component oxide system CaO-SiO2-AI203-Fe203-SO 3 are analysed for their subsolidus phase relationship. The study is confined to the portion of the system in which C2S, the key mineralogical component of belite clinker is present. As a result eighteen equil
The CaO-rich portions of the systems CaO-A~203-SiO2-K2SO,, CaO-AC203-K2SO,-CaSO,, CaO-A~203-SiO2-K2SO,-CaSO, and CaO-A~203-Fe203-CaSO,-K2SO, have been studied experimentally. Schemes are presented showing phase assemblages compatible at subsolidus temperatures. Melting commences at about 825°C in as
The CaO-A1203-CaSO4-H20 system has been investigated at 50°C and 85°C, by calculations of the equilibrium solubility surfaces of AH3, C3AH6, CH, ettringite, monosulphoaluminate and gypsum. The results indicate that monosulphoaluminate becomes a stable phase at elevated temperature. Since ettringite
The CaO-AI203-CaSO4-H20 system at 25°C has been investigatedby calcula~ons on the equilibrium solubility surfaces of AH 3, C3AH6, CH, C6AS3H x, C4ASH x and gypsum. The results are in good agreement with the previous experimental data and make it possible to define the hydrates in equilibrium with aq