✦ LIBER ✦

Homogenization of plain weave composites using two-scale convergence

✍ Scribed by S. Shkoller; G. Hegemier

Publisher: Elsevier Science
Year: 1995
Tongue: English
Weight: 962 KB
Volume: 32
Category: Article
ISSN: 0020-7683
DOI: 10.1016/0020-7683(94)00160-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Homogenization of Reynolds Equation by T

Homogenization of Reynolds Equation by Two-Scale Convergence

✍ Peter Wall 📂 Article 📅 2007 🏛 Coastal and Estuarine Research Federation 🌐 English ⚖ 301 KB

Strength prediction of multi-layer plain

Strength prediction of multi-layer plain weave textile composites using the direct micromechanics method

✍ Ryan L. Karkkainen; Bhavani V. Sankar; Jerome T. Tzeng 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 252 KB

Previously developed micromechanical methods for stiffness and strength prediction are adapted for analysis of multi-layer plain weave textile composites. Utilizing the direct micromechanics method (DMM) via finite element modeling, three methods are presented: (a) direct simulation of a multi-layer

Homogenization of Monotone Operators by

Homogenization of Monotone Operators by the Method of Two-Scale Convergence

✍ V. V. Zhikov; M. E. Rychago; S. B. Shul’ga 📂 Article 📅 2005 🏛 Springer US 🌐 English ⚖ 179 KB

Homogenization of quasilinear parabolic

Homogenization of quasilinear parabolic problems by the method of Rothe and two scale convergence

✍ Emmanuel Kwame Essel; Komil Kuliev; Gulchehra Kulieva; Lars-Erik Persson 📂 Article 📅 2010 🏛 Springer-Verlag 🌐 English ⚖ 182 KB

Propagation and localization of elastic

Propagation and localization of elastic waves in highly anisotropic periodic composites via two-scale homogenization

✍ Valery P. Smyshlyaev 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 398 KB

Composite material design of two-dimensi

Composite material design of two-dimensional structures using the homogenization design method

✍ D. Fujii; B. C. Chen; N. Kikuchi 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 861 KB

## Abstract Composite materials of two‐dimensional structures are designed using the homogenization design method. The composite material is made of two or three different material phases. Designing the composite material consists of finding a distribution of material phases that minimizes the mean