✦ LIBER ✦

High-temperature gas-cooled reactors

✍ Scribed by C.L. Rickard; G. MeLese D'Hospital

Publisher: Elsevier Science
Year: 1968
Tongue: English
Weight: 125 KB
Volume: 7
Category: Article
ISSN: 0029-5493
DOI: 10.1016/0029-5493(68)90061-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fuel elements for high temperature gas-c

Fuel elements for high temperature gas-cooled reactors

✍ R.L. Hammer; J.M. Robbins; J.H. Coobs; J.L. Scott 📂 Article 📅 1972 🏛 Elsevier Science 🌐 English ⚖ 142 KB

The safety of Modular High Temperature G

The safety of Modular High Temperature Gas-Cooled Reactors

✍ P.R. Kasten 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 799 KB

155. Resin fuel particles for high-tempe

155. Resin fuel particles for high-temperature gas-cooled reactors

✍ M.D Silverman; C.B Pollock 📂 Article 📅 1973 🏛 Elsevier Science 🌐 English ⚖ 132 KB

Detection of gas-permeable fuel particle

Detection of gas-permeable fuel particles for high-temperature gas-cooled reactors

✍ B.A. Thiele; D.P. Stinton; D.A. Costanzo 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 771 KB

Fuel for High-Temperature Gas-Cooled Reactors (HTGR) consists of uranium oxide-carbide and thoria microspheres coated with layers of pyrolytic carbon and silicon carbide. The pyrolytic carbon coatings must be gastight to perform properly during irradiation. Therefore, particles must be carefully cha

Safety evaluations of accident scenarios

Safety evaluations of accident scenarios in high temperature gas-cooled reactors

✍ Peter G. Kroeger 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 749 KB

96. Some aspects of carbon transport in

96. Some aspects of carbon transport in high temperature gas cooled reactors

✍ M.R. Everett; D.V. Kinsey 📂 Article 📅 1965 🏛 Elsevier Science 🌐 English ⚖ 219 KB

dioxide and water vapor were determined in flowing helium at a total pressure of 1 atm. The rates were obtained from continuously recorded weight changes and from intermittent analyses of the effluent gases. The effect of temperature, flow rate, partial pressure of oxidant, and burnoff were examined