𝔖 Bobbio Scriptorium
✦   LIBER   ✦

High temperature electrical and thermal properties of the bulk carbon nanotube prepared by SPS

✍ Scribed by C. Qin; X. Shi; S.Q. Bai; L.D. Chen; L.J. Wang


Publisher
Elsevier Science
Year
2006
Tongue
English
Weight
194 KB
Volume
420
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Effect of sintering temperature on the s
✍ Yucheng Zhao; Mingzhi Wang πŸ“‚ Article πŸ“… 2009 πŸ› Elsevier Science 🌐 English βš– 987 KB

were heated to a sintering temperature between 1250 β€’ C and 1450 β€’ C at a heating rate of 300 β€’ C/min, with a holding time of 5 min in nitrogen atmosphere. The microstructure, phase constitution, microhardness and fracture toughness of the prepared PcBN were then studied. It was shown that the Si 3

Anisotropic Electrical Transport Propert
✍ Luca Valentini; Silvia Bittolo Bon; JosΓ¨ M. Kenny πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 305 KB

## Abstract This paper demonstrates how the electric‐field‐assisted thermal annealing of octadecylamine‐functionalized SWNT/PMMA films induces an increase in the composite transversal conductivity of several orders of magnitude and a decrease in the lateral conductivity. This difference has been ra

Thermal and electrical conduction proper
✍ Atsuto Okamoto; Itaru Gunjishima; Takashi Inoue; Megumi Akoshima; Hidenori Miyag πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier Science 🌐 English βš– 953 KB

We present both thermal and electrical conduction properties of vertically aligned carbon nanotubes (VACNTs), synthesized by the water-assisted chemical vapor deposition method using Fe-Ti-O nanoparticles as catalyst. Thermal diffusivity and electrical resistance of VACNTs have been measured by the

The structural and electrical properties
✍ P. Chowdhury; Harish C. Barshilia; N. Selvakumar; B. Deepthi; K.S. Rajam; Ayan R πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 515 KB

Thin films of TiO 2 were grown on n-type Si substrate by thermal oxidation of Ti films deposited by dc sputtering. The phase purity of TiO 2 was confirmed by Raman spectroscopy, and secondary ion mass spectroscopy was used to analyze the interfacial and chemical composition of the TiO 2 thin films.