A passively mode-locked diode end-pumped YVO~4~/Nd:YVO~4~ composite crystal laser with a five-mirror folded cavity was first demonstrated in this paper by using a low temperature semiconductor saturable absorber mirror grown by metal organic chemical vapor deposition. Both the Q-switching and contin
High-average-power and high-conversion-efficiency continuous wave mode-locked Nd:YVO4 laser with a semiconductor absorber mirror
โ Scribed by Ji-ying Peng; Jie-guang Miao; Yong-gang Wang; Bao-shan Wang; Hui-ming Tan; Long-sheng Qian; Xiao-yu Ma
- Publisher
- Elsevier Science
- Year
- 2007
- Tongue
- English
- Weight
- 211 KB
- Volume
- 39
- Category
- Article
- ISSN
- 0030-3992
No coin nor oath required. For personal study only.
โฆ Synopsis
A high-power continuous wave (cw) mode-locked Nd:YVO 4 solid-state laser was demonstrated by use of a semiconductor absorber mirror (SAM). The maximum average output power was 8.1 W and the optic-to-optic conversion efficiency was about 41%. At the maximum incident pump power, the pulse width was about 8.6 ps and the repetition rate was 130 MHz. Experimental results indicated that this absorber was suitable for high power mode-locked solid-state lasers.
๐ SIMILAR VOLUMES
A diode-pumped passively mode-locked YVO 4 / Nd:YVO4 composite crystal green laser with a semiconductor saturable absorber mirror (SESAM) and a intracavity frequencydoubling KTP crystal was realized. The maximum average output power of 2.06 W at 532 nm with a repetition rate of 100 MHz was obtained
In this paper, we demonstrate a high-power erbiumdoped fiber amplifier pumped by single-mode titanium sapphire (Ti:S) laser at 980 nm. The highest output power of 22.6 dBm is measured at 1549 nm with an input signal power of 4 dBm and a pump power of 300 mW. This corresponds to power-conversion effi