𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Hexa-band internal printed slot antenna for mobile phone application

✍ Scribed by Chih-Hsien Wu; Kin-Lu Wong

Book ID
102949095
Publisher
John Wiley and Sons
Year
2007
Tongue
English
Weight
1016 KB
Volume
50
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A promising internal printed slot antenna for hexa‐band operation in the mobile phone is presented. The antenna comprises a C‐shaped slot and an open‐ended monopole slot, and both are integrated into a compact configuration to occupy a small area of 21 × 45 mm^2^ in the top portion of the system circuit board. The integrated C‐shaped slot and monopole slot are fed in series using a 50‐Ω microstrip feedline. The antenna can provide two wide operating bands centered at about 900 and 2200 MHz to cover the GSM850/900/DCS/PCS/UMTS mobile communication and the 2.4‐GHz WLAN operation. Good radiation performances of the proposed antenna over the operating bands are also obtained. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 35–38, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22981

📜 SIMILAR VOLUMES

Internal multiband printed folded slot a
Internal multiband printed folded slot antenna for mobile phone application
✍ Kin-Lu Wong; Yun-Wen Chi; Shu-Yang Tu 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 958 KB

## Abstract A novel printed folded slot antenna suitable for GSM/DCS/PCS/UMTS multiband operation in the mobile phone is presented. The proposed slot antenna has a planar configuration and is easy to fabricate by printing on the system circuit board of the mobile phone. The slot antenna has a lengt

Compact planar hexa-band inverted-F ante
Compact planar hexa-band inverted-F antenna for mobile phone application
✍ J. Ma; Y.-Z. Yin; W. Hu; X.-S. Ren 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 396 KB 👁 1 views

## Abstract This article presents a compact multiband planar inverted‐F antenna design for mobile phone applications. The proposed antenna comprises dual twisted lines, a shorting strip and an L‐shaped coupling strip. The dual twisted lines are excited by the coupling strip to generate four resonan

A small printed dual-band antenna for mo
A small printed dual-band antenna for mobile phones
✍ Jae Hee Kim; Won Woo Cho; Wee Sang Park 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 388 KB 👁 1 views

## Abstract A small printed antenna is proposed for dual‐band applications. The antenna is patterned on the front of an 0.8‐mm FR4 substrate to obtain a low‐frequency resonance and a stub is patterned on the back of the substrate to obtain a high‐frequency resonance. The antenna without ground plan

Integrated internal patch antenna for UM
Integrated internal patch antenna for UMTS mobile phone application
✍ Saou-Wen Su; Austin Chen; Kin-Lu Wong; Yuan-Chih Lin 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 464 KB

## Abstract A novel design of the internal patch antenna mounted above and integrated with the shielding metal case for mobile phone application is presented. The antenna mainly comprises a simple rectangular patch as the antenna's top radiating patch and a shielding metal case as part of the anten

Compact internal quad-band antenna for m
Compact internal quad-band antenna for mobile phones
✍ Irene Ang; Yong-Xin Guo; M. Y. W. Chia 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 299 KB

## Abstract A novel compact internal quad‐band handset antenna for covering GSM900, DCS1800, PCS1900, and ISM2450 bands is presented. Details of the antenna are discussed along with measured and simulated results. The simulation is based on the FDTD method. © 2003 Wiley Periodicals, Inc. Microwave