𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Heat transfer in a draft tube spouted bed with bottom solids feed

✍ Scribed by L.A.P Freitas; J.T Freire

Book ID
114079206
Publisher
Elsevier Science
Year
2001
Tongue
English
Weight
420 KB
Volume
114
Category
Article
ISSN
0032-5910

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Solid circulation in a liquid spout-flui
Solid circulation in a liquid spout-fluid bed with multi draft tubes
✍ F. Figen Ar; B. ZΓΌhtΓΌ Uysal πŸ“‚ Article πŸ“… 1998 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 238 KB πŸ‘ 1 views

Considering the application of the technique of liquid spouting with multi draft tubes to heat exchangers, the solids circulation rate was studied both experimentally and theoretically. It was found that the solids circulation rate increased with the liquid velocity and with the amount of solids use

Minimum Circulation Velocity in a Spoute
Minimum Circulation Velocity in a Spouted Bed Apparatus with Draft Tube
✍ A. Kmiec; W. Ludwig; R. Szafran πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 128 KB πŸ‘ 1 views

## Abstract Measurements of spouting characteristics were carried out in an apparatus consisting of two conical sections connected to a cylindrical section. Inside the lower conical section a draft tube was fixed. Results of minimum circulation velocity were obtained for an apparatus equipped with

Hydrodynamic and mass transfer study of
Hydrodynamic and mass transfer study of a gas-liquid-solid draft tube spouted bed bioreactor
✍ D.G. Karamanev; T. Nagamune; I. Endo πŸ“‚ Article πŸ“… 1992 πŸ› Elsevier Science 🌐 English βš– 652 KB

It has already been proved that the soft polyurethane foam particles are very effective carriers for immobilizing fungi and/or mycelia. However, the classic three phase fluid&d bed bioreactor was not effective enough for the production of antibiotics like penicillin due to the lower value of the mas