𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Heat transfer crisis during liquid nitrogen cooling of high temperature superconductor

✍ Scribed by Yu.A. Kirichenko; S.M. Kozlov; K.V. Rusanov; E.G. Tyurina


Publisher
Elsevier Science
Year
1991
Tongue
English
Weight
476 KB
Volume
31
Category
Article
ISSN
0011-2275

No coin nor oath required. For personal study only.

✦ Synopsis


The maximum heat flux density and the corresponding temperature drop during nucleate boiling of liquid nitrogen on the surface of high temperature superconductor ceramic samples were studied over a wide range of pressures. The experiments were performed during pool and narrow gap channel boiling. The stability of nucleate boiling and the dynamics of temperature rise of the ceramics were studied during heat transfer crises.


πŸ“œ SIMILAR VOLUMES


Effect of centrifugal acceleration on he
✍ S.M. Kozlov; N.M. Levchenko; S.V. Nozdrin; K.V. Rusanov; E.G. Tyurina πŸ“‚ Article πŸ“… 1993 πŸ› Elsevier Science 🌐 English βš– 612 KB

This paper reports an experimental investigation of heat transfer to liquid nitrogen from samples of high temperature superconductor (HTSC) ceramics YBa2Cu30 x in the range of relative centrifugal accelerations from 1 to 1434. The effect of the porous, penetrable structure of the samples on thermal

Coupled radiation-convection heat transf
✍ Xin-Lin Xia; Yong Huang; He-Ping Tan; De-Peng Ren πŸ“‚ Article πŸ“… 2003 πŸ› John Wiley and Sons 🌐 English βš– 502 KB

## Abstract The coupled radiation‐convection heat transfer of high‐temperature participating medium in heated/cooled tubes is investigated numerically. The medium flows in a laminar and fully developed state with a Poiseuille velocity distribution, but the thermal status is developing. By the discr

Characteristics of heat transfer and tem
✍ Masanori Monde; Yuichi Mitsutake; Peter Lloyd Woodfield; Shinichi Maruyama πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 474 KB

## Abstract An experiment has been done to measure the rise in temperature of a gas during filling a tank at high pressure. The experimental condition is that filling gases are nitrogen and hydrogen at a pressure of 5 to 35 MPa and at a filling mass of __G__=45 to 324 g/min for hydrogen. The temper