## Abstract An X‐band miniaturized antenna which uses half‐mode substrate integrated waveguide structure is designed. We analyzed the electromagnetic field using the cavity model and the electromotive force method. The input impedance, simulated and experimental results of return loss, resonant fre
Half mode substrate integrated waveguide miniaturization using complementary split ring resonators
✍ Scribed by Li Qiang; Hong-Min Lu; Wei Zhao; Hong-Bo Qin; Bing Liu
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 364 KB
- Volume
- 53
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A miniaturization technology of half mode substrate integrated waveguide (HMSIW) is realized by complementary split ring resonators (CSRRs) in this article. The HMSIW etched with CSRRs can be regarded as the one filled with a dielectric material with higher ε~r~. With specific CSRR arrays introduced, the CSRR‐loaded structure can be 15% more compact than the original one. Moreover, the above CSRRs can be also used to enhance the rejection skirt of the bandpass filter in this article. Finally, a compact and sharp rejection ultra‐wideband bandpass filter with designed notched‐band is fabricated. Very good agreement is observed between measurement and simulation results. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:1074–1077, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.25918
📜 SIMILAR VOLUMES
## Abstract In this letter, the miniaturized substrate integrated waveguide (SIW) filter is proposed using a complementary spiral resonator (CSR). The CSR is based on the multiple turns SR (SRm), which was introduced in 2004 by some of the authors. CSR technique can be applied to the design of mini
## Abstract In this article, a novel miniaturized hybrid ring operating at 2 GHz is presented. By replacing the 270° branch line of conventional hybrid ring by −90° left‐handed branch line realized by complementary split ring resonators (CSRRs), the occupied area of our proposed hybrid ring can be
## Abstract One novel bandpass filter implemented with combination of two different structures‐complementary split rings resonators (CSRRs) and substrate integrated waveguide (SIW) is proposed in this article. Several CSRRs are etched on the surface of SIW to form the stopband with very sharp rejec
## Abstract A compact planar bandpass filter is presented in this letter, which is implemented by the combination of three different electromagnetic structures, saying, substrate‐integrated waveguide (SIW), square complementary split‐ring resonators (CSRRs) and dumbbells slot.The resonator is forme
## Abstract A novel ultra‐wideband (UWB) bandpass filter (BPF) is presented using a half‐mode T‐septum substrate integrated waveguide combined with electromagnetic bandgap structures. When compared with conventional substrate integrated waveguide filters, its width is very small and can work in mon