A mathematical model for a #exible arm undergoing large planar #exural deformations, continuously rotating under the e!ect of a hub torque and supported by a #exible base is developed. The position of a typical material point along the span of the arm is described using the inertial reference frame
GEOMETRICALLY NON-LINEAR DYNAMIC MODEL OF A ROTATING FLEXIBLE ARM
โ Scribed by B.O. AL-BEDOOR; M.N. HAMDAN
- Publisher
- Elsevier Science
- Year
- 2001
- Tongue
- English
- Weight
- 184 KB
- Volume
- 240
- Category
- Article
- ISSN
- 0022-460X
No coin nor oath required. For personal study only.
โฆ Synopsis
In this paper, a mathematical model for a rotating #exible arm undergoing large planar #exural deformations is developed. The position of a typical material point along the span of the arm is described by using the inertial reference frame via a transformation matrix from the body co-ordinate system which is attached to the root of the rotating arm. The condition of inextensibility is employed to relate the axial and transverse de#ections of the material point. The position and velocity vectors obtained, after imposing the inextensibility conditions, are used in the kinetic energy expression while the exact curvature is used in the potential energy. The Lagrangian dynamics in conjunction with the assumed modes method is utilized to derive directly the equivalent temporal equations of motion. The resulting non-linear model is discussed, simulated and the result of simulation are presented and compared to those obtained from the linear theory for di!erent arm parameters.
๐ SIMILAR VOLUMES
The non-linear, moderately large amplitude #exural free vibrations of an arm clamped with a setting angle to a rigid rotating hub are studied. The shear deformation and rotary inertia e!ects are assumed to be negligible, but account is taken of axial inertia, non-linear curvature and the inextensibi
The dynamic stability behavior of a rotating blade subjected to axial periodic forces is studied by Lagrange's equation and a Galerkin finite element method. The effects of geometric non-linearity, shear deformation and rotary inertia are considered. The iterative method is used to get the mode shap
A comparative modelling of a flexible rotating beam has been considered in this study. The dynamic model is based on a beam with either isotropic material or composite material. The composite beam is considered as orthotropic fiber-reinforced and symmetrically laminated. Both small linear as well as
A clamped-free flexible arm rotating in a horizontal plane and carrying a moving mass is studied in this paper. The arm is modelled by the Euler-Bernoulli beam theory in which rotatory inertia and shear deformation effects are ignored. The assumed mode method in conjunction with Hamilton's principle
A geometrically non-linear model of the rotating shaft is introduced, which includes KaH rman non-linearity, non-linear curvature e!ects, large displacements and rotations as well as gyroscopic e!ects. Through applying Timoshenko-type assumptions, the shear e!ects are also included in the model. Con