Gas transport of helium, hydrogen, carbon dioxide, oxygen, argon, nitrogen, and methane in three soluble poly(phenylene sulfone imide)s based on 2,2-bis(3,4decarboxyphenyl) hexafluoropropane dianhydride (6FDA) has been investigated. The effects of increasing length of well-defined oligo(phenylene su
Gas transport and structural features of sulfonated poly(phenylene oxide)
β Scribed by G. A. Polotskaya; S. A. Agranova; T. A. Antonova; G. K. Elyashevich
- Publisher
- John Wiley and Sons
- Year
- 1997
- Tongue
- English
- Weight
- 136 KB
- Volume
- 66
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
β¦ Synopsis
The effect of ionomer structure on gas transport properties of membranes was investigated. For this purpose physical and transport properties of poly(phenylene oxide) (PPO) and its sulfonated derivative (SPPO) were compared. SPPO has a more rigid structure and a lower free volume, which determines low gas permeability and high permselectivity. Gas transport properties of two types of SPPO-PPO composite membranes with top layers prepared from solutions in methanol or N,N-dimethylacetamide (DMA) were investigated. The use of SPPO solution in DMA leads to the formation of membranes with higher gas permeability. It was shown that DMA is a morphologically active solvent for SPPO. Strong complexes of SPPO with DMA are formed in solution and retained upon transition into the condensed state. The plasticizing effect of DMA on SPPO determines the high gas permeability of the membranes and is in agreement with their mechanical properties.
π SIMILAR VOLUMES
In the present paper, the structure and conductivity for the complex of sulfonated poly(pheny1ene oxide) lithium (SPPOLi) and poly(ethy1ene oxide) (PEG) were studied. Glass transition temperature change determined by differential scanning calorimeter analysis desmonstrated that the two components ha
Gas sorption and transport properties at 35ΠC have been reported for a series of UV-irradiated films of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO). UV irradiation induced crosslinking in all films. The gas permeability was reduced upon crosslinking while significant increases in gas permselectivit
Poly(2,6-dimethyl-1,4 -phenylene oxide) (PPO) is a chemically resistant polymer and, therefore, an attractive material for the formation of membranes. However, membranes of unmodified PPO prepared by an immersion precipitation possess very low hydraulic permeabilities at the filtration processes. T
The gas permeability of 0, and N, for homogeneous and composite membranes prepared from poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) samples with different molecular weight parameters was investigated. Temperature dependencies of gas permeability coefficients and permselectivity were determined for