✦ LIBER ✦

Fundamental investigations on the spark plasma sintering/synthesis process: I. Effect of dc pulsing on reactivity

✍ Scribed by W. Chen; U. Anselmi-Tamburini; J.E. Garay; J.R. Groza; Z.A. Munir

Publisher: Elsevier Science
Year: 2005
Tongue: English
Weight: 255 KB
Volume: 394
Category: Article
ISSN: 0921-5093
DOI: 10.1016/j.msea.2004.11.020

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fundamental investigations on the spark

Fundamental investigations on the spark plasma sintering/synthesis process: II. Modeling of current and temperature distributions

✍ U. Anselmi-Tamburini; S. Gennari; J.E. Garay; Z.A. Munir 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 539 KB

Effect of pulsed DC current on neck grow

Effect of pulsed DC current on neck growth between tungsten wires and tungsten plates during the initial stage of sintering by the spark plasma sintering method

✍ Naoki Toyofuku; Takuya Kuramoto; Takahito Imai; Manshi Ohyanagi; Zuhair A. Munir 📂 Article 📅 2011 🏛 Springer 🌐 English ⚖ 489 KB

Effect of sintering process on the micro

Effect of sintering process on the microstructures and properties of in situ TiB2–TiC reinforced steel matrix composites produced by spark plasma sintering

✍ Binghong Li; Ying Liu; Jun Li; Hui Cao; Lin He 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 830 KB

Spark plasma sintering (SPS) is a new technique to rapidly produce metal matrix composites (MMCs), but there is little work on the production of TiB 2 -TiC reinforced steel matrix composites by SPS. In this work, in situ TiB 2 -TiC particulates reinforced steel matrix composites have been successful

Effect of Al addition on the synthesis o

Effect of Al addition on the synthesis of Ti3SiC2 bulk material by pulse discharge sintering process

✍ Songlan Yang; ZhengMing Sun; Qiaoqin Yang; Hitoshi Hashimoto 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 524 KB

Ti 3 SiC 2 bulk materials were synthesized from the starting powders of 1Ti/1Si/2TiC-xAl and 3Ti/1SiC/1C-xAl (molar ratios, x ranges from 0.05 to 0.15) at temperatures between 1100 and 1400 • C for 15 min by pulse discharge sintering technique. X-ray diffraction and scanning electron microscopy were