✦ LIBER ✦

Fretting Corrosion of Separable Electrical Contacts

✍ Scribed by Ambier, J.; Perdigon, P.

Book ID: 117911529
Publisher: IEEE
Year: 1985
Tongue: English
Weight: 685 KB
Volume: 8
Category: Article
ISSN: 0148-6411
DOI: 10.1109/tchmt.1985.1136460

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fretting Corrosion of Tin-Coated Electri

Fretting Corrosion of Tin-Coated Electrical Contacts

✍ Neijzen, J.; Glashorster, J. 📂 Article 📅 1987 🏛 IEEE 🌐 English ⚖ 987 KB

Simulation for fretting corrosion of tin

Simulation for fretting corrosion of tin-coated copper contacts

✍ K. Y. Lee; D. K. Jeong; H. G. Joo; Y. W. Park 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 German ⚖ 669 KB

## Abstract The simulations of contact resistance variation under various oxide fractions are conducted. The copper oxide is assigned on the contact area with various fractions by the random distribution technique. The calculated contact resistance at each oxide area fraction is compared with the e

Control of fretting corrosion

✍ Kenneth G. Budinski 📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 272 KB

Fretting corrosion of solder-coated elec

Fretting corrosion of solder-coated electrical contacts : Morton Antler. IEEE Trans Components Hybrids Mfg Technol.CHMT-7, 129 (March 1984)

📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 257 KB

Fretting corrosion resistance and fretti

Fretting corrosion resistance and fretting corrosion product cytocompatibility of ferritic stainless steel

✍ Xulin, Sun ;Ito, Atsuo ;Tateishi, Tetsuya ;Hoshino, Akihiko 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 348 KB

To avoid nickel ion release from SUS317L as an implant amount of iron ion or colloidal fine particles released from material, a new type of nickel, commercially free, of high FJ was about a quarter of that from SUS317L, although the purity, and high chromium ferritic stainless steel, was devel-weigh

Fretting corrosion of solder-coated elec

Fretting corrosion of solder-coated electrical contacts: Morton Antler IEEE Trans Components Hybrids Nfg Technol. Chmt-7, 129 (March 1984)

📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 180 KB

Early in AT & T Bell Laboratories involvement with plasma smear removal for multilayer boards, the generic problem of uniform etching over large size panels became obvious'.'Tr were developed which provide a quantit.~tive measurement of the etch uniformity. These techniques were used to evaluate the