✦ LIBER ✦

FREE VIBRATION ANALYSIS OF ORTHOTROPIC RIGHT CANTILEVER TRIANGULAR PLATES

✍ Scribed by T. SAKIYAMA; M. HUANG; H. MATSUDA; C. MORITA

Publisher: Elsevier Science
Year: 2003
Tongue: English
Weight: 176 KB
Volume: 259
Category: Article
ISSN: 0022-460X
DOI: 10.1006/jsvi.2002.5133

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Accurate free vibration analysis of the

Accurate free vibration analysis of the orthotropic cantilever plate

✍ D.J. Gorman 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 413 KB

Utilizing the superposition method, an accurate analytical type solution is described for resolving the problem of free vibration of cantilever plates with rectangular orthotropy. A number of verification checks performed to verify the mathematical procedure are described. Convergence is found to be

TRANSVERSE VIBRATIONS OF RECTANGULAR, TR

TRANSVERSE VIBRATIONS OF RECTANGULAR, TRAPEZOIDAL AND TRIANGULAR ORTHOTROPIC, CANTILEVER PLATES

✍ D.V. Bambill; P.A.A. Laura; R.E. Rossi 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 132 KB

Obviously the triangular, isosceles configuration constitutes a particular situation (c/l = 0).

FREE-VIBRATION ANALYSIS OF RIGHT TRIANGU

FREE-VIBRATION ANALYSIS OF RIGHT TRIANGULAR PLATES WITH VARIABLE THICKNESS

✍ T. SAKIYAMA; M. HUANG 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 233 KB

An approximate method for analyzing the free vibration of right triangular plates with arbitrary variable thickness and various boundary conditions is proposed. In this paper, a right triangular plate is considered as a kind of rectangular plate with non-uniform thickness. Therefore, the free-vibrat

Dynamics Of Partially Supported Right Tr

Dynamics Of Partially Supported Right Triangular Orthotropic Plates

✍ S. Mirza; Y. Alizadeh 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 250 KB

NATURAL VIBRATION ANALYSIS OF CLAMPED RE

NATURAL VIBRATION ANALYSIS OF CLAMPED RECTANGULAR ORTHOTROPIC PLATES

✍ m. dalaei; a.d. kerr 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 353 KB

The natural vibrations of clamped rectangular orthotropic plates are analyzed using the extended Kantorovich method. The developed iterative scheme converges very rapidly to the final result. The obtained natural frequencies are evaluated for a square plate made of Kevlar 49 Epoxy and the obtained r

Theoretical Free Vibration Analysis of R

Theoretical Free Vibration Analysis of Rectangular Cantilever Plates with Rigid Point Supports

✍ H.T. Saliba 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 468 KB

The practical engineering problem of cantilever plates with rigid point supports is dealt with in this paper. A highly accurate, economical and practical solution is outlined for the transverse free vibration analysis of these plates. The accuracy of the solution is discussed. It is also shown how w