𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fracture properties of PMR-15/graphite-fiber composites

✍ Scribed by Alamgir Farouk; Noshir A. Langrana

Publisher
Elsevier Science
Year
1992
Tongue
English
Weight
985 KB
Volume
45
Category
Article
ISSN
0266-3538

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Off-axis tensile properties and fracture
Off-axis tensile properties and fracture in a unidirectional graphite/polyimide composite (celion 6000/PMR 15)
✍ Jeffrey Harper; J. Daniel Whittenberger; Frances I. Hurwitz πŸ“‚ Article πŸ“… 1984 πŸ› Society for Plastic Engineers 🌐 English βš– 822 KB

## Abstract Tensile properties of unidirectional Celion 6000 graphite/PMR 15 polyimide composites prepared by hot molding and cold molding processes were measured at room temperature and 316Β°C, the upper use temperature of the polyimide resin, at both 45 and 90Β° to the fiber axis. The resulting fra

Resin/fiber thermo-oxidative interaction
Resin/fiber thermo-oxidative interactions in pmr polyimide/graphite composites
✍ William B. Alston πŸ“‚ Article πŸ“… 1980 πŸ› Society for Plastic Engineers 🌐 English βš– 461 KB

## Abstract The amounts of resin weight loss and fiber weight loss in four PMR polyimide/graphite fiber composites were calculated from the composite weight losses and the fiber/resin ratios of the composites after long term thermo‐oxidative aging in 600Β° F air. The accelerating effect of graphite

Dynamic mechanical characterization of c
Dynamic mechanical characterization of cure of a polyimide-graphite fiber composite (PMR 15/Celion 6000)
✍ F. I. Hurwitz πŸ“‚ Article πŸ“… 1983 πŸ› Society for Plastic Engineers 🌐 English βš– 687 KB

## Abstract Dynamic mechanical studies of thermosetting PMR 15 polyimide/Celion 6000 composites were used to characterize cure behavior. Variation in composite shear modules with cure time for laminates partially cured under 3.45 MPa pressure was compared with that of laminates fully cured under pr