Off-axis tensile properties and fracture in a unidirectional graphite/polyimide composite (celion 6000/PMR 15)
✍ Scribed by Jeffrey Harper; J. Daniel Whittenberger; Frances I. Hurwitz
- Publisher
- Society for Plastic Engineers
- Year
- 1984
- Tongue
- English
- Weight
- 822 KB
- Volume
- 5
- Category
- Article
- ISSN
- 0272-8397
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Tensile properties of unidirectional Celion 6000 graphite/PMR 15 polyimide composites prepared by hot molding and cold molding processes were measured at room temperature and 316°C, the upper use temperature of the polyimide resin, at both 45 and 90° to the fiber axis. The resulting fractures were characterized by scanning electron microscopy and materialographic techniques. Variation in tensile properties with processing history occurred in the elastic modulus and strain to failure for specimens loaded at 90° at 316°C, and in the fracture stress, and hence the in‐plane shear stress, for those loaded at 45° at room temperature. Significant plastic deformation was observed in the 45° orientation at 316°C for material produced by both processing methods. In general, fracture occurred by both failure within the matrix and at the fiber‐matrix interface; the degree of interfacial failure increased with temperature. Secondary cracking below the primary fracture surface also was observed.