✦ LIBER ✦

Fracture mechanics testing of weldments

✍ Scribed by C. Thaulow

Publisher: Elsevier Science
Year: 1988
Tongue: English
Weight: 601 KB
Volume: 31
Category: Article
ISSN: 0013-7944
DOI: 10.1016/0013-7944(88)90131-2

No coin nor oath required. For personal study only.

✦ Synopsis

The present standards for fracture mechanics testing are originally developed for the testing of plain material, and it is now widely accepted that the procedures must be revised when weldments are tested[l-31. The present papers highlights two aspects of fracture mechanics testing of weldments (particularly the HAZ). First the importance of differentiating between general materials characterization and weldment testing, and secondly arguments for substituting the through thickness notch with surface notches.

📜 SIMILAR VOLUMES

Studies on the fracture mechanics parame

Studies on the fracture mechanics parameters of weldment with mechanical heterogeneity

✍ J.X. Zhang; Y.W. Shi; M.J. Tu 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 918 KB

Ah&act-The fully plastic solutions of welded centrecracked strip for plane stress problem were carefully investigated with the fully plastic finite element method. It was introduced for assessing the fracture mechanics parameters of weldment with mechanical heterogeneity that there existed an equiva

Factors affecting the estimation of frac

Factors affecting the estimation of fracture mechanics parameters of center-cracked weldment

✍ J.X. Zhang; Y.W. Shi; M.J. Tu 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 362 KB

For the estimation of fracture mechanics parameters of cracked weldment with mechanical heterogeneity, there exist equivalent yielding stress and equivalent strain hardening exponents in the vicinity of the crack tip keeping the assessment of fracture mechanics parameters of weldment in the same way

An extensometer for fracture mechanics t

An extensometer for fracture mechanics testing of thin composite laminates

✍ M. Barbieri; A. Corvi 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 300 KB

Dynamic fracture toughness of heavy sect

Dynamic fracture toughness of heavy section, narrow gap, gas tungsten arc weldments

✍ W.A. Logsdon 📂 Article 📅 1982 🏛 Elsevier Science 🌐 English ⚖ 837 KB

\bstract-Dynamic fracture toughness tests were performed on three, ASME SAS33 Gr A Cl 2 narrow gap, gas tungsten arc weldments (minimum yield strength equals 70 ksi. 485 MPa). Linear elastic f& results were obtained at low temperatures while J-integral techniques were utilized to evaluate dynamic fr

The fracture mechanics of mortars

✍ A.G. Evans; J.R. Clifton; E. Anderson 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 647 KB

Fracture mechanics deliberation of lugs

✍ A. Li; D.W. Hoeppner 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 355 KB

Mode I stress intensity factors for a symmetrical lug with a through radial crack emanating from the internal boundary were evaluated with finite element techniques. A new geometric conhguration was developed which saves a minimum of 60% in computer time over the traditional configuration. The effec