✦ LIBER ✦

Fracture and microstructure of open cell aluminum foam

✍ Scribed by E. Amsterdam; P. R. Onck; J. Th. M. De Hosson

Publisher: Springer
Year: 2005
Tongue: English
Weight: 490 KB
Volume: 40
Category: Article
ISSN: 0022-2461
DOI: 10.1007/s10853-005-4995-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Deformation of open-cell aluminum foam

✍ C. San Marchi; A. Mortensen 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 323 KB

The mechanical properties of high-purity aluminum foams produced by replication from salt precursors are measured in compression. These foams have homogeneous open-porosity, cell sizes equivalent to the particle size of the precursor salt (ෂ500 µm in this case) and relative densities near 25%. Defor

Fracture of open- and closed-cell metal

Fracture of open- and closed-cell metal foams

✍ P. R. Onck; R. Merkerk; A. Raaijmakers; J. Th. M. Hosson 📂 Article 📅 2005 🏛 Springer 🌐 English ⚖ 826 KB

Microstructure and physical properties o

Microstructure and physical properties of open-cell polyolefin foams

✍ M. A. Rodriguez-Perez; M. Álvarez-Láinez; J. A. de Saja 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 411 KB 👁 2 views

The Influence of Cell Shape Anisotropy o

The Influence of Cell Shape Anisotropy on the Tensile Behavior of Open Cell Aluminum Foam

✍ E. Amsterdam; H. van Hoorn; J. Th. M. De Hosson; P. R. Onck 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 317 KB 👁 2 views

Creep of aluminium–magnesium open cell f

Creep of aluminium–magnesium open cell foam

✍ Frédéric Diologent; Russell Goodall; Andreas Mortensen 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 384 KB

Aluminium-5 wt.% magnesium open cell foam produced by replication and tested in tension at 300, 350 or 450 °C creeps at rates between 10 À3 and 10 À8 s À1 . The behaviour of the foam matches that of the alloy from which it is made: three-power law creep with the same activation energy as for Al-Mg a

The influence of strain-induced damage o

The influence of strain-induced damage on the mechanical response of open-cell aluminum foam

✍ E. Amsterdam; J.H.B. de Vries; J.Th.M. De Hosson; P.R. Onck 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 992 KB

Compression and tensile tests have been performed on annealed (AN) and heat-treated (HT) Duocel open-cell aluminum foam (20 PPI) samples for relative densities ranging between 3 and 13%. The novel approach in this work is to study the evolution of damage and to distinguish the influence of ductile a