โ Scribed by E Reverchon; S Cardea
No coin nor oath required. For personal study only.
Microporous cellulose acetate membranes have been prepared from polymer-acetone solutions using a supercritical fluid phase inversion process in which CO 2 acts as the non-solvent. Series of experiments were performed at various polymer concentrations, temperatures and pressures. The structure of the resulting membranes was analysed using scanning electron microscopy. We operated with polymer concentrations ranging between 5 and 40% (w/w) in acetone obtaining different pore dimensions and membrane structures. Increasing the percentage of polymer in the solution, the structure of the membranes changed from beads-like structure to cellular structure. Polymer concentration also influenced the mean diameter of the pores that ranged from 2 to 50 m for polymer concentrations from 40 to 5% (w/w).
We also tested membrane formation pressures between 100 and 200 bar and at temperature between 45 and 65 โข C. Pressure influences the change in membrane structure from cellular to beads-like, whereas temperature has a minor influence on pore size: both the effects can be partially related to CO 2 density. Cellulose acetate membrane formation mechanisms have also been discussed.
๐ SIMILAR VOLUMES
Gas antisolvent (GAS) expansion of dirnethylsulfoxide (DMSO) and N,N-dimethylformamide (DMFA) solutions with supercritical carbon dioxide was used to produce biologically active powders of insulin. Powders with 90% of the particles smaller than 4 prn and 10% smaller than 1 pm were obtained under all