✦ LIBER ✦

Formation and separation of the fragmented surface structure of low-carbon steel and copper under friction

✍ Scribed by I.I. Garbar

Publisher: Elsevier Science
Year: 1996
Tongue: English
Weight: 733 KB
Volume: 198
Category: Article
ISSN: 0043-1648
DOI: 10.1016/0043-1648(96)06938-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The influence of hardness difference on

The influence of hardness difference on the frictional and wear behaviour of steel/copper alloy pairs in plane sliding friction under mixed friction conditions

✍ Hans Krause; Winfried Tackenberg 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 943 KB

Cementite transformation in low carbon s

Cementite transformation in low carbon steel under the influence of sulphur

✍ J. Hucińska 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 German ⚖ 337 KB

## Abstract Cementite/Fe~3~C carbide in a commercial low carbon steel after prolonged service in naphtha environment with traces of sulphur of 0.3 ppm and at a temperature of 200–220°C has been examined. It has been stated that under the influence of sulphur, cementite at the steel surface and ins

Volatile corrosion inhibitor film format

Volatile corrosion inhibitor film formation on carbon steel surface and its inhibition effect on the atmospheric corrosion of carbon steel

✍ Da-quan Zhang; Zhong-xun An; Qing-yi Pan; Li-xin Gao; Guo-ding Zhou 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 362 KB

The effect of warm rolling on the struct

The effect of warm rolling on the structure and properties of a low-carbon steel

✍ D.N. Hawkins; A.A. Shuttleworth 📂 Article 📅 1979 🏛 Elsevier Science ⚖ 981 KB

Formation of low surface energy separato

Formation of low surface energy separators with undercut structures via a full-solution process and its application in inkjet printed matrix of polymer light-emitting diodes

✍ Rubo Xing; Tengling Ye; Yan Ding; Dongge Ma; Yanchun Han 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 505 KB

The influence of tempering temperature o

The influence of tempering temperature on the reversed austenite formation and tensile properties in Fe–13%Cr–4%Ni–Mo low carbon martensite stainless steels

✍ Yuanyuan Song; Xiuyan Li; Lijian Rong; Yiyi Li 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 860 KB

The influence of tempering temperature on the reversed austenite formation and tensile properties are investigated in Fe-13%Cr-4%Ni-Mo low carbon martensite stainless steel in the temperature range of 550-950 • C. It is found that at the temperatures below 680 • C, the reversed austenite formation o