𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Forced vibrations of a clamped-free beam with a mass at the free end with an external periodic disturbance acting on the mass with applications in ships’ structures

✍ Scribed by D.V. Bambill; S.J. Escanes; C.A. Rossit


Publisher
Elsevier Science
Year
2003
Tongue
English
Weight
68 KB
Volume
30
Category
Article
ISSN
0029-8018

No coin nor oath required. For personal study only.

✦ Synopsis


An exact, analytical solution is obtained for the title problem which constitutes a classical one although no solution is available in well known textbooks and handbooks normally used by the structural engineer in several fields of technology: ocean and naval engineering, aerospace applications, etc. The authors performed this study motivated by a situation where excessive displacements were noticed in a structural element carrying a relatively small motor at the free end and placed at the engine room of a naval vessel. The Bernoulli-Euler model has been employed.


📜 SIMILAR VOLUMES


Vibration Of Symmetrically Laminated Cla
✍ K. Chandrashekhara; K.M. Bangera 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 228 KB

Natural frequencies of a symmetrically laminated composite beam with a mass at the free end are determined. The equations of motion for the laminated beam are derived accounting for the Poisson effect, rotary inertia and transverse shear deformation. Exact solutions are presented to demonstrate the

On the free vibrations of an oscillator
✍ W.T. van Horssen; A.K. Abramian; Hartono 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 199 KB

In this paper the free vibrations of a linear, single degree of freedom oscillator with a (periodically and stepwise changing) time-varying mass have been studied. Not only solutions of the oscillator equation have been constructed, but also stability diagrams for the free vibrations have been prese

VIBRATIONS OF A CANTILEVER TAPERED BEAM
✍ N.M. Auciello; G. Nolè 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 234 KB

The free vibration frequencies of a beam composed of two tapered beam sections with different physical characteristics with a mass at its end can be determined by using either the exact procedure, for which purpose the solution to the problem can be expressed using Bessel functions, or the approxima