## Abstract Corrosion fatigue and fatigue properties of weldโbonded and spotโwelded austenitic stainless steels EN 1.4301 and EN 1.4318 in 2B or 2F and 2H conditions were investigated. The corrosive environment was 3.5% NaCl solution at +ย 50โยฐC. In air the fatigue strengths of the weldโbonded singl
Flow-assisted corrosion of API X-52 steel in 3.5% NaCl solution
โ Scribed by Amarnath; T. K. G. Namboodhiri; S. N. Upadhyay
- Publisher
- John Wiley and Sons
- Year
- 2002
- Tongue
- English
- Weight
- 1020 KB
- Volume
- 80
- Category
- Article
- ISSN
- 0008-4034
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
## Abstract Corrosion fatigue and fatigue properties of spotโwelded austenitic stainless steels EN 1.4301 and EN 1.4318 in 2B or 2F and 2H conditions were investigated in 3.5% sodium chloride (NaCl) solution and in air. The shearโloaded specimens were single spot overlap joints. The effect of stee
Steel gas pipelines are exposed externally to damage by surface corrosion and cracking phenomena. They are the main deterioration mechanism under coating failure and cathodic protection (CP) that can reduce the structural integrity of buried gas transmission pipelines where the soil aggressiveness a
## Abstract This work presents the electrochemical kinetics results measured during the corrosion of API X52 pipeline steel immersed in aqueous environments, containing dissolved hydrogen sulfide (H~2~S) under turbulent flow conditions. In order to control the turbulent flow conditions, a rotating
## Abstract This work presents the electrochemical results obtained during the study of the corrosion of X52 pipeline steel sample, immersed in brines containing H~2~S, under turbulent flow conditions. Linear polarisation resistance (LPR), electrochemical impedance spectroscopy (EIS), Electrochemic
The galvanic corrosion of magnesium alloy AZ91D coupled to a steel fastener was studied using a boundary element method (BEM) model and experimental measurements. The BEM model used the measured polarization curves as boundary conditions. The experimental program involved measuring the total corrosi