𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Finite-Element Analysis of Stress on Dental Implant Prosthesis

✍ Scribed by José Henrique Rubo; Edson Antonio Capello Souza

Book ID
111278126
Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
293 KB
Volume
12
Category
Article
ISSN
1523-0899

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Finite element analysis of the influence
Finite element analysis of the influence of the offset placement of an implant-supported prosthesis on bone stress distribution
✍ E. Anitua; G. Orive 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 936 KB

## Abstract The aim of this study was to evaluate the influence of the straight alignment versus distal offset placement of an implant‐supported prosthesis (using implants with different diameters: 4 mm, 4.5 mm, and 5 mm) on bone stress distribution. 3D finite element models of a straight configura

Finite element analysis of a transmandib
Finite element analysis of a transmandibular implant
✍ Tsutomu Nomura; Michael P. Powers; J. Lawrence Katz; Chikara Saito 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 390 KB

## Abstract Finite element analysis (FEA) was used to study the influence of bony height and baseplate effect on the transmandibular implant (TMI). FEA was used to assess the stress distribution in the mandible, with and without a baseplate. Forces were applied to the center of a bar space. The von

Finite element analysis of dental struct
Finite element analysis of dental structures ? axisymmetric and plane stress idealizations
✍ Selna, Lawrence G. ;Shillingburg, Herbert T. ;Kerr, Peeter A. 📂 Article 📅 1975 🏛 John Wiley and Sons 🌐 English ⚖ 581 KB

## Abstract The finite element method used to study stress generated in a maxillary second premolar as a result of occlusal forces. This mathematical technique has been applied extensively in structural engineering and structural mechanics. It is well suited to the analysis of stress in teeth and d