✦ LIBER ✦

Fim atom-probe investigation of the interphase boundary of a nickel-base superalloy

✍ Scribed by D. Blavette; A. Bostel

Publisher: Elsevier Science
Year: 1986
Weight: 226 KB
Volume: 177
Category: Article
ISSN: 0167-2584
DOI: 10.1016/0167-2584(86)90948-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Atom-probe microanalysis of a nickel-bas

Atom-probe microanalysis of a nickel-base single crystal superalloy

✍ H. Harada; A. Ishida; Y. Murakami; H.K.D.H. Bhadeshia; M. Yamazaki 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 393 KB

Early stages of precipitation of γ′-phas

Early stages of precipitation of γ′-phase in a nickel base superalloy: An atom-probe investigation

✍ S. Chambreland; A. Walder; D. Blavette 📂 Article 📅 1988 🏛 Elsevier Science ⚖ 983 KB

Chemical composition measurements of a n

Chemical composition measurements of a nickel-base superalloy by atom probe field ion microscopy

✍ Nelia Wanderka; Uwe Glatzel 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 535 KB

Investigations of grain boundary microch

Investigations of grain boundary microchemistry in nickel base superalloys

✍ Krystyna Stiller 📂 Article 📅 1990 🏛 Elsevier Science ⚖ 58 KB

Atom probe tomography investigation of t

Atom probe tomography investigation of the microstructure of superalloys N18

✍ E Cadel; D Lemarchand; S Chambreland; D Blavette 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 652 KB

Microstructural features of nickel base superalloys N18 have been investigated by transmission electron microscopy (TEM), field emission gun-scanning electron microscopy (FEG-SEM), field ion microscopy (FIM), one-dimensional atom probe (APFIM) and three-dimensional atom probe (3DAP). Heat treatments

Low temperature effects on the fracture

Low temperature effects on the fracture behaviour of a nickel base superalloy

✍ R.L. Tobler 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 546 KB

The mechanical properties of a solution treated and double aged nickel -18% iron -18% chromium alloy (Inconel 718) were studied to assess its utility at temperatures in the ambient-to-cryogenic range. Uniaxial tensile property measurements using unnotched specimens at decreasing temperatures between