𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fatigue strength of a single crystal in the gigacycle regime

✍ Scribed by Ryan J. Morrissey; Patrick J. Golden


Publisher
Elsevier Science
Year
2007
Tongue
English
Weight
597 KB
Volume
29
Category
Article
ISSN
0142-1123

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Influence of inclusion size on fatigue b
✍ J.M. Zhang; S.X. Li; Z.G. Yang; G.Y. Li; W.J. Hui; Y.Q. Weng πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 465 KB

The fatigue properties of four high strength steels with same strength class but containing different inclusion sizes were investigated using an ultrasonic fatigue testing machine in the gigacycle fatigue regime. The fracture surfaces were observed using field emission scanning electron microscopy (

Staircase testing of a titanium alloy in
✍ Ryan Morrissey; Theodore Nicholas πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 134 KB

The objective of this research was to investigate the high cycle fatigue behavior of a titanium alloy using an ultrasonic fatigue system. Fatigue testing from 10 6 to 10 9 cycles under fully reversed cycling (R = Γ€1) was performed to determine the ultra-high cycle fatigue behavior of Ti-6Al-4V. The

Prediction of the S–N curves of high-str
✍ Y.B. Liu; Y.D. Li; S.X. Li; Z.G. Yang; S.M. Chen; W.J. Hui; Y.Q. Weng πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 543 KB

Methods to predict the S-N curves of high-strength steels in the very high cycle fatigue (VHCF) regime are reviewed. At the same time, a new prediction in form of Basquin's equation is proposed based on the prediction of fatigue strengths in both high cycle fatigue regime and very high cycle fatigue

Evaluation of fatigue crack initiation i
✍ Daniel Leidermark; Johan Moverare; Mikael SegersΓ€ll; Kjell Simonsson; SΓΆren SjΓΆs πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier 🌐 English βš– 280 KB

The fatigue crack initiation in a notched single-crystal nickel-base superalloy component at 500Β°C was investigated and analysed. A critical plane approach in combination with a critical distance method has been adopted, in which the total shear strain ranges on the discrete slip planes are evaluate