✦ LIBER ✦

Fatigue damage development in Al2O3/Al composite

✍ Scribed by X.C. Liu; C. Bathias

Publisher: Elsevier Science
Year: 1994
Tongue: English
Weight: 175 KB
Volume: 16
Category: Article
ISSN: 0142-1123
DOI: 10.1016/0142-1123(94)90039-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Creep and Creep Damage Tolerance of Al60

Creep and Creep Damage Tolerance of Al6061–Al2O3 Particulate Composites

✍ E. Gariboldi; M. Vedani 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 361 KB 👁 1 views

Sintering behaviour and microstructures

Sintering behaviour and microstructures of Ti(Al,O)/Al2O3, Ti3Al(O)/Al2O3 and TiAl(O)/Al2O3 in situ composites

✍ Z.H. Cai; D.L. Zhang 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 860 KB

Fatigue behavior of Al2O3-based composit

Fatigue behavior of Al2O3-based composite with BaTiO3 piezoelectric phase

✍ Sirirat Rattanachan; Yukio Miyashita; Yoshiharu Mutoh 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 562 KB

Fatigue behavior of Al 2 O 3 -based composite with BaTiO 3 piezoelectric phase was studied by carrying out four-point bending fatigue tests for the poled and unpoled composites, which was compared to that of monolithic Al 2 O 3 . Tests were conducted under load ratio of R = 0.1 at frequency of 20 Hz

Damage of a 2D Al2O3SiC composite during

Damage of a 2D Al2O3SiC composite during uniaxial creep

✍ F. Lamouroux; M. Steen; J.L. Vallès 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 702 KB

Toughening in composites of Al2O3 reinfo

Toughening in composites of Al2O3 reinforced with Al

✍ Flinn, B.D.; RÃ¼hle, M.; Evans, A.G. 📂 Article 📅 1989 🏛 Elsevier Science ⚖ 838 KB

Ahstrac&---The toughening of A&O, by Al has been investigated, using electron microscopy to provide in sifu measurements of the microstructural parameters that govern ductile ligament toughening. The results are used to compare the measured toughness with values calculated for ligaments that exhibit

Damage development of Al/SiC metal matri

Damage development of Al/SiC metal matrix composite under fatigue, creep and monotonic loading conditions

✍ A. Rutecka; Z.L. Kowalewski; K. Pietrzak; L. Dietrich; K. Makowska; J. Woźniak; 📂 Article 📅 2011 🏛 Elsevier 🌐 English ⚖ 876 KB

A consolidation of powders using the KOBO method at elevated temperature was elaborated for production of Al/SiC metal matrix composite (MMC). The observations of the mean strain and inelastic strain range during the force controlled high cycle fatigue (HCF) tests identified the ratcheting mechanism