✦ LIBER ✦

Fabrication, Microstructure, and Mechanical Properties of Tip/Al Composite

✍ Scribed by C. Cui; Y. Shen; Y. Li; J. Sun; S.-B. Kang

Publisher: John Wiley and Sons
Year: 2003
Tongue: English
Weight: 199 KB
Volume: 5
Category: Article
ISSN: 1438-1656
DOI: 10.1002/adem.200300378

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical properties and microstructure

Mechanical properties and microstructure of HDPE/AL(OH)3/silicone oil composite

✍ Jinhai Yang; Yong Zhang; Yinxi Zhang 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 881 KB

Superalloy IN625 with Cellular Microstru

Superalloy IN625 with Cellular Microstructure – Fabrication Route and Mechanical Properties

✍ P. Quadbeck; J. Kaschta; R.F. Singer 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 200 KB 👁 1 views

Fabrication and Microstructure of C/Cu C

Fabrication and Microstructure of C/Cu Composites

✍ Yiwen Liu; Chengyu Zhang; Shengru Qiao; Zhimao Yang 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 700 KB

Microstructure, Fabrication and Properti

Microstructure, Fabrication and Properties of Quasicrystalline Al—Cu—Fe Alloys: A Review

✍ Elina Huttunen-Saarivirta 📂 Article 📅 2004 🏛 John Wiley and Sons ⚖ 51 KB

ChemInform Abstract: Microstructure and

ChemInform Abstract: Microstructure and Mechanical Properties of CuTi—SiC Composites

✍ K. N. BRASZCZYNSKA; A. BOCHENEK 📂 Article 📅 2010 🏛 John Wiley and Sons ⚖ 24 KB 👁 1 views

Composition, microstructure and mechanic

Composition, microstructure and mechanical properties of chemically vapour-deposited tantalum

✍ Dr. D. J. Jerreat; Dr. Rees D. Rawlings 📂 Article 📅 1976 🏛 John Wiley and Sons 🌐 English ⚖ 557 KB

## Abstract The paper reports the results of a structural investigation of C.V.D. tantalum, which had been deposited on a silica substrate. Deposits at 1000°C were high impurity powders or flakes, at 1100°C (normal deposition temperature) foil‐like, these containing much lower silicon contents, bei