๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Fabrication and CVD carbon infiltration of carbon and graphite filament wound cylinders

โœ Scribed by D.W. Bauer; W.V. Kotlensky; J.W. Warren; W.H. Smith; Early Gray

Publisher
Elsevier Science
Year
1972
Tongue
English
Weight
119 KB
Volume
10
Category
Article
ISSN
0008-6223

No coin nor oath required. For personal study only.

โœฆ Synopsis

Experimentally derived empirical correlations will be presented which describe the influence of deposition parameters on the pyrolytic infiltration of woven and other fibrous carbon constructions of varying densities and geometries. Results are interpreted in terms of the influence of the above factors on gas phase reaction and diffusion rates within the porous structure.

๐Ÿ“œ SIMILAR VOLUMES

Mechanical properties of CVD carbon infi
Mechanical properties of CVD carbon infiltrated carbon and graphite filament wound cylinders
โœ W.V. Kotlensky; D.W. Bauer; J.W. Warren; W.H. Smith; J.C. Campbell ๐Ÿ“‚ Article ๐Ÿ“… 1972 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 114 KB

of fiber modulus. The constants C,, and Cs6 show difference between composites containing carbonized fibers and those containing graphitized fibers; these differences are not related to fiber Young's modulus or preferred orientation. ## 44. Carbon-fiber thermal insulation Z. L. Ardary and C. W. Re

CVD Carbon infiltration and strength for
CVD Carbon infiltration and strength for fabric lay-up carbon/carbon composites
โœ D.W. Bauer; W.V. Kotlensky ๐Ÿ“‚ Article ๐Ÿ“… 1972 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 119 KB

Experimentally derived empirical correlations will be presented which describe the influence of deposition parameters on the pyrolytic infiltration of woven and other fibrous carbon constructions of varying densities and geometries. Results are interpreted in terms of the influence of the above fact

Properties of isotruxene carbons and of
Properties of isotruxene carbons and of graphites fabricated from these carbons
โœ L.G. Overholser; J.M. Napier; D.R. Masters ๐Ÿ“‚ Article ๐Ÿ“… 1972 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 141 KB

The pore structure of the pyrolysis residues of poiy-2.~dimethylphenyleneoxide (PPO) and oxidized PPO were studied by adsorption measurements. The Dubinin method with different gases as adsorbents was used for determination of the micropore volume. In all cases slit-shaped micropores were found, Pre