✦ LIBER ✦

Fabrication and comparison of thermochromic material-based fiber-optic sensors for monitoring the temperature of water

✍ Scribed by Wook Jae Yoo; Jeong Ki Seo; Kyoung Won Jang; Ji Yeon Heo; Jin Soo Moon; Jang-Yeon Park; Byung Gi Park; Bongsoo Lee

Publisher: Optical Society of Japan
Year: 2011
Tongue: English
Weight: 598 KB
Volume: 18
Category: Article
ISSN: 1340-6000
DOI: 10.1007/s10043-011-0012-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Monitoring and control of fabrication of

Monitoring and control of fabrication of fibres from a polymer melt based on the fiber temperature (review)

✍ I. D. Pupyshev; A. Yu. Dvilis 📂 Article 📅 1995 🏛 Springer US 🌐 English ⚖ 415 KB

Investigation of optic fiber sensor base

Investigation of optic fiber sensor based on surface plasmon resonance for monitoring the concentration of plasma deposited hydrophilic functional groups on material surfaces

✍ Yu-Chia Tsao; Yu-Cheng Lin; Woo-Hu Tsai; Mu-Shiang Wu 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 730 KB

An optical fiber sensor based on the surface plasmon resonance (SPR) is proposed as a way to monitor the concentration of plasma deposited hydrophilic functional groups on material surfaces by the SPR dip shift in wavelength. The SPR optical fiber sensor was installed in the isopropanol (IPA) treatm

Design and development of low-cost optic

Design and development of low-cost optical-fiber sensors for temperature metrology: Process monitoring of an epoxy resin system

✍ B. Degamber; J. Tetlow; G. F. Fernando 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 215 KB 👁 2 views

Optimization of the frequency-modulated

Optimization of the frequency-modulated continuous wave technique for referencing and multiplexing intensity-based fiber optic sensors

✍ R.A. Perez-Herrera; D.A. Pereira; O. Frazão; J.M. Castro Ferreira; J.L. Santos; 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 320 KB

Modelling the pressure and temperature s

Modelling the pressure and temperature sensitivity of an optically excited micromachined silicon sensor for permanently installed downhole monitoring systems

✍ B.S. Douma; P. Eigenraam; P. Hatlem 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 448 KB

An analytical model of the pressure and temperature sensitivity of a permanently installed downhole monitoring sensor is presented. The sensing concept is embodied in a micromachined silicon resonator using optical excitation and interrogation. The relation between pressure and resonant frequency is

Comparison of the analytical capabilitie

Comparison of the analytical capabilities of an amperometric and an optical sensor for the determination of nitrate in river and well water

✍ Margaret A. Stanley; Joe Maxwell; Mairead Forrestal; Andrew P. Doherty; Brian D. 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 992 KB

The analysis of nitrate in water has been studied using novel amperometric and optical sensors. A flow-injection analysis system with amperometric detection has been developed in which nitrate is determined as nitrite after reduction in a cadmium column. The working electrode is glassy carbon modifi