## Abstract Electrospun zein membranes were prepared using DMF as solvent. By changing the solution concentration, the electrospinning voltage and the distance between the spinneret and collector, nanofibrous meshes without bead defects could be obtained. In order to improve the mechanical strength
Fabrication and characterization of zein/viscose textibe fibers
β Scribed by Fei Chi; Hongzhang Chen
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 964 KB
- Volume
- 118
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Azlons are increasingly concerned for their excellent performance properties and biodegradation. A kind of novel azlon, zein/viscose textibe fibers, were fabricated by wetβspinning of zein and cellulose sulfonate blended solution. Some parameters that determine the fabrication process were optimized. The structure and properties of zein/viscose fibers were characterized, and compared with those of common viscose fibers. Dry breaking tenacity of zein/viscose fibers was 2.02 CN/dtex, whereas dry breaking elongation was 16.6%. Mechanical properties of zein/viscose fibers were a little better than common viscose fibers. The moisture regain rate of zein/viscose fibers was 14.1%, similar to that of viscose fibers. From the microstructure of zein/viscose fiber, viscose acted as framework and zein was accreted to viscose. The content of protein was 14.48% in zein/viscose fibers. The basic chains of zein and viscose were not changed by blended spinning, so the fibers had advantages of both zein and viscose. Β© 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
π SIMILAR VOLUMES
A two-beam interferometric method is used to study the change of optical parameters of cold drawn boiled viscose fibers at different times. A stress-strain device conjugated to the Pluta polarizing interference microscope is used to investigate the dynamical behavior of opto-mechanical properties at
The fabrication and characterization of side-hole singlemode optical fibers have been studied. Controlling the internal pressure of side holes in a preform made possible the fabrication of side-hole fibers with various core ellipticities and with a circular core. The relationship between the V c and